Yamaha RX-V561 owner manual 67 En, Remote control, Resetting the system

Page 71

Troubleshooting

■Remote control

Problem

Cause

Remedy

See

page

 

 

 

The remote control

Wrong distance or angle.

The remote control functions within a maximum

 

does not work nor

 

range of 6 m (20 ft) and no more than 30 degrees off-

23

function properly.

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

 

 

inverter type of fluorescent lamp, etc.) is

 

—

 

striking the remote control sensor of this

 

 

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

3

 

 

 

 

 

The remote control code is not correctly

Set the remote control code correctly using “List of

59

 

set.

remote control codes” at the end of this manual.

 

 

 

 

 

 

 

 

Try setting another code for the same manufacturer

 

 

 

using “List of remote control codes” at the end of this

59

 

 

manual.

 

 

 

 

 

Even if the remote control code is correctly set, there are some models that do not respond to the remote control.

■Resetting the system

Use this feature to reset all the parameters of this unit to the initial factory settings.

1Press 1STANDBY/ON on the front panel to set this unit to the standby mode.

2Press and hold 0TONE CONTROL and then press 1STANDBY/ON to turn on this

unit.

The advanced setup menu appears in the front panel display.

3Press BSTRAIGHT repeatedly to select “RESET”.

Select “CANCEL” to cancel the initialization procedure without making any changes.

4Press 1STANDBY/ON to confirm your selection and set this unit to the standby mode.

Notes

•This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup menu parameters will not be initialized.

•The initial factory settings are activated next time you turn on this unit.

y

To cancel the initialization procedure at any time without making any changes, press BSTRAIGHT repeatedly to select “CANCEL” and then press 1STANDBY/ON.

INFORMATION

ADDITIONAL

 

 

English

67 En

Page 70 Page 72
Image 71
Page 70 Page 72
Contents RX-V561 Important safety instructions Example of Antenna Grounding FCC Information for US customersSerial No For Canadian CustomersContents We Want You Listening For a Lifetime FeaturesAM loop antenna Remote controlGetting started Check that you received all of the following partsEnjoy DVD playback Set up your speakersQuick start guide Center and surround speakers Connect your DVD player and other components See page 20 for the details For further connectionsConnect the FM and AM antennas to this unit Press Fscene 2 or Scene 2 to select Disc Listening Using the other Scene buttonsCheck the type of the connected speakers Press FsceneWhat do you want to do with this unit? AC Outlets ConnectionsRear panel 10 En11 En Placing speakersSubwoofer Right Left Front speakers a Connecting speakers12 En Right Left Center Speaker Subwoofer Center speaker13 En Setting the speaker impedanceBefore connecting to the Speakers Terminal Connecting to the Speakers terminalsVideo jacks Information on jacks and cable plugs14 En Audio jacksHdmi cable plug Information on Hdmi15 En Hdmi jack and cable plugConnect the video components as follows Connecting video components16 En Video monitor Cable TV or Satellite tuner Connecting to the HDMI, Component Video or S Video jacks17 En Hdmi connectionVideo monitor DVD player 18 EnComponent Video connection Video connection19 En Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder Connecting to the Multi CH Input jacks20 En Using the Video AUX jacks on the front panelConnecting the FM and AM antennas 21 En Connecting the power cableTurning on and off the power Set this unit to the standby mode22 En Front panel display30º Using the remote control23 En Infrared window24 En Optimizing the speaker setting for your listening roomUsing Auto Setup 25 En Top SET Menu display appears in the OSD 26 EnPress G Enter to return to the Autoresult display Press G Enter to confirm your selectionIf Warning appears If an error screen appears27 En Selected Scene template is assigned to the button Selecting the Scene templatesSelecting the desired Scene template 28 EnWhich Scene template would you like to select? 29 En30 En Preset Scene templates descriptionsRenaming the Scene templates Customizing the preset Scene TemplatesCreating your original Scene templates 31 En32 En Quick guide to contentsPlayback Basic operationsSelecting the front speaker set Using the Zone B featureAdditional operations 33 EnEnjoying pure hi-fi stereo sound Adjusting the tonal qualityAdjusting speaker levels during Playback 34 En35 En Selecting the night listening modeDisplaying signal information Press D AMP and then press Q Menu on the remote controlPlaying video sources Background Using your headphonesUsing the sleep timer 36 En37 En Category Program FeaturesSound field programs Sound field program descriptionsPRO Logic Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode 38 EnEditing sound fields parameters 39 EnPress 5PRESET/TUNING l / h once to begin automatic tuning FM/AM tuningAutomatic tuning Manual tuning41 En Automatic preset tuningManual preset tuning Press and hold 2PRESET/TUNING for more than 3 seconds Selecting preset stationsExchanging preset station See Selecting preset stations on thisSupported USB devices Using a USB memory device or a USB portable audio playerPlayback operation 43 EnPlayback icon All all repeat, 1 single repeat icons 44 EnFunction of the play information display Press G Enter to play the selected file45 En Recording46 En Auto setup Auto SetupManual setup Manual Setup 47 En Using SET MenuSignal information Signal Info 48 En Speaker settings Aspeaker SET49 En Unit Unit 50 EnSpeaker level BSP Level Speaker distance CSP DistanceLow-frequency effect level Elfe Level Audio settings Gaudio SET51 En Center speaker equalizer Dcenter GEQInput assignment 52 EnRename Decoder select modeDTS decoder prioritize setting 53 En54 En Multi channel input setupDisplay settings Adisplay SET Repeat Repeat 55 EnParameter initialization DPARAM. INI USB playback styles Eusb Play Style56 En Remote control featuresUsing remote control on the Scene feature Controlling the input source Components in the Scene modeAMP Controlling this unit, a TV, or other components57 En Controlling this unit Controlling a TVControlling other components 58 En59 En Setting remote control codesRemote control code default settings Input Component Manufacturer DefaultSpeaker impedance SP IMP Advanced setupFactory presets Preset 60 EnGeneral TroubleshootingProblem Cause Remedy See 61 En62 En 63 En Problem Cause RemedyTuner Before Auto SetupError message Cause Remedy See 64 En65 En During Auto SetupAfter Auto Setup Status message Cause Remedy 66 EnPress Bstraight repeatedly to select Reset Remote controlResetting the system Advanced setup menu appears in the front panel displayAudio information Glossary68 En MP3 69 EnSound field program information Video information70 En SpecificationsNumerics Index71 En Headphone 72 EnSpeaker 73 EnFront panel/Face avant Remote control/Boîtier de télécommande Iii List of remote control codes Liste des codes de commandeInternational Manesth VCR TV/DVD/VCR ComboTV/VCR Combo DVD/VCR ComboDVD LD Player DVD/LD ComboDVD Recorder DVRRX-V561 Menu Volume
Top Page Image Contents