Yamaha RX-V561 owner manual Recording, 45 En

Page 49

Recording

Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components.

Notes

•When this unit is set to the standby mode, you cannot record between other components connected to this unit.

•TONE CONTROL (see page 34) and VOLUME settings, speaker levels (see page 34) and the sound field programs (see page 37) do not affect recorded material.

•The source connected to the USB jack or the MULTI CH INPUT jacks of this unit cannot be recorded.

•Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if your source component is connected to provide only digital signals, you cannot record the source.

•S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an S-video or a composite video signal on your DVD recorder.

•A given input source is not output on the same OUT (REC) channel.

•Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is turned off, this unit may distort the sound from other components.

•Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

y

Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

OPERATION	BASIC

1Turn on all the connected components.

2Press DINPUT l / h repeatedly (or press one of the input selector buttons (C)) to

select the source component you want to record from.

3Start playback on the selected source component or select a broadcast station.

4Start recording on the recording component.

English

45 En

Image 49

Contents RX-V561 Important safety instructions Example of Antenna Grounding FCC Information for US customersSerial No For Canadian CustomersContents We Want You Listening For a Lifetime FeaturesGetting started Remote controlCheck that you received all of the following parts AM loop antennaQuick start guide Set up your speakersEnjoy DVD playback Center and surround speakers Connect your DVD player and other components Connect the FM and AM antennas to this unit For further connectionsSee page 20 for the details Check the type of the connected speakers Using the other Scene buttonsPress Fscene Press Fscene 2 or Scene 2 to select Disc ListeningWhat do you want to do with this unit? Rear panel Connections10 En AC Outlets11 En Placing speakers12 En Connecting speakersRight Left Center Speaker Subwoofer Center speaker Subwoofer Right Left Front speakers aBefore connecting to the Speakers Terminal Setting the speaker impedanceConnecting to the Speakers terminals 13 En14 En Information on jacks and cable plugsAudio jacks Video jacks15 En Information on HdmiHdmi jack and cable plug Hdmi cable plug16 En Connecting video componentsConnect the video components as follows 17 En Connecting to the HDMI, Component Video or S Video jacksHdmi connection Video monitor Cable TV or Satellite tunerComponent Video connection 18 EnVideo connection Video monitor DVD playerConnecting a CD player and a CD recorder/MD recorder Connecting audio componentsConnecting to the Multi CH Input jacks 19 EnConnecting the FM and AM antennas Using the Video AUX jacks on the front panel20 En Turning on and off the power Connecting the power cableSet this unit to the standby mode 21 En22 En Front panel display23 En Using the remote controlInfrared window 30ºUsing Auto Setup Optimizing the speaker setting for your listening room24 En 25 En Press G Enter to return to the Autoresult display 26 EnPress G Enter to confirm your selection Top SET Menu display appears in the OSD27 En If an error screen appearsIf Warning appears Selecting the desired Scene template Selecting the Scene templates28 En Selected Scene template is assigned to the buttonWhich Scene template would you like to select? 29 En30 En Preset Scene templates descriptionsCreating your original Scene templates Customizing the preset Scene Templates31 En Renaming the Scene templatesPlayback Quick guide to contentsBasic operations 32 EnAdditional operations Using the Zone B feature33 En Selecting the front speaker setAdjusting speaker levels during Playback Adjusting the tonal quality34 En Enjoying pure hi-fi stereo soundDisplaying signal information Selecting the night listening modePress D AMP and then press Q Menu on the remote control 35 EnUsing the sleep timer Using your headphones36 En Playing video sources BackgroundSound field programs Category Program FeaturesSound field program descriptions 37 EnEnjoying unprocessed input sources Straight decoding mode Enjoying 2-channel sources using Standard decoders38 En PRO LogicEditing sound fields parameters 39 EnAutomatic tuning FM/AM tuningManual tuning Press 5PRESET/TUNING l / h once to begin automatic tuningManual preset tuning Automatic preset tuning41 En Exchanging preset station Selecting preset stationsSee Selecting preset stations on this Press and hold 2PRESET/TUNING for more than 3 secondsPlayback operation Using a USB memory device or a USB portable audio player43 En Supported USB devicesFunction of the play information display 44 EnPress G Enter to play the selected file Playback icon All all repeat, 1 single repeat icons45 En RecordingManual setup Manual Setup Auto setup Auto Setup46 En Signal information Signal Info Using SET Menu47 En 48 En Speaker settings Aspeaker SET49 En Speaker level BSP Level 50 EnSpeaker distance CSP Distance Unit Unit51 En Audio settings Gaudio SETCenter speaker equalizer Dcenter GEQ Low-frequency effect level Elfe LevelInput assignment 52 EnDTS decoder prioritize setting Decoder select mode53 En RenameDisplay settings Adisplay SET Multi channel input setup54 En Parameter initialization DPARAM. INI 55 EnUSB playback styles Eusb Play Style Repeat RepeatUsing remote control on the Scene feature Remote control featuresControlling the input source Components in the Scene mode 56 En57 En Controlling this unit, a TV, or other componentsControlling this unit Controlling a TV AMPControlling other components 58 EnRemote control code default settings Setting remote control codesInput Component Manufacturer Default 59 EnFactory presets Preset Advanced setup60 En Speaker impedance SP IMPProblem Cause Remedy See Troubleshooting61 En General62 En 63 En Problem Cause RemedyError message Cause Remedy See Before Auto Setup64 En TunerAfter Auto Setup During Auto Setup65 En Status message Cause Remedy 66 EnResetting the system Remote controlAdvanced setup menu appears in the front panel display Press Bstraight repeatedly to select Reset68 En GlossaryAudio information Sound field program information 69 EnVideo information MP370 En Specifications71 En IndexNumerics Headphone 72 EnSpeaker 73 EnFront panel/Face avant Remote control/Boîtier de télécommande Iii List of remote control codes Liste des codes de commandeInternational Manesth TV/VCR Combo TV/DVD/VCR ComboDVD/VCR Combo VCRDVD DVD Recorder DVD/LD ComboDVR LD PlayerRX-V561 Menu Volume