SET MENU
1 SOUND MENU
Use this menu to manually adjust any speaker settings or compensate for video signal processing delays.
;MANUAL SETUP |
| ;MANUAL SETUP |
|
1 SOUND MENU | 1/2 | 1 SOUND MENU | 2/2 |
. A)SPEAKER SET |
| . F)D.RANGE |
|
B)SP LEVEL |
| G)AUDIO SET |
|
C)SP DISTANCE |
|
|
|
D)CENTER GEQ |
|
|
|
E)LFE LEVEL |
|
|
|
[p]/[p]:Up/Down |
| [p]/[p]:Up/Down |
|
[ENTER]:Enter |
| [ENTER]:Enter |
|
■Speaker settings A)SPEAKER SET
Use this feature to manually adjust any speaker settings.
FRONT B speaker setting FRONT B
Use this feature to select the location of the front speakers connected to the FRONT B terminals.
Choices: FRONT, ZONE B
1 SOUND MENU
A)SPEAKER SET
FRONT B;;;;FRONT
[p]/[p]:Up/Down [p]/[[]:Select
• Select “FRONT” to turn on or off SPEAKERS A and B when the speakers connected to the FRONT B terminals are set in the main zone.
• Select “ZONE B” if the speakers connected to the FRONT B terminals are set in another zone. If SPEAKERS A is turned off and SPEAKERS B is turned on, all the speakers including the subwoofer in the main zone are muted and this unit outputs sound at the FRONT B terminals only.
Notes
•If you connect headphones to the PHONES jack of this unit, the sound is output from both headphones and the FRONT B terminals when “FRONT B” is set to “ZONE B”.
•If a DSP program is selected when “FRONT B” is set to “ZONE B”, this unit automatically enters the Virtual CINEMA DSP mode (see page 38).
Woofer section of a speaker is 16 cm (6.5 in) or larger: large
Woofer section of a speaker is smaller than 16 cm (6.5 in): small
Front speakers FRONT SP
Choices: SMALL, LARGE
1 SOUND MENU
A)SPEAKER SET
FRONT SP
SMALL >LARGE
When the front speakers are large
Select “LARGE” (large).
When the front speakers are small
Select “SMALL” (small).
Note
When “LFE/BASS OUT” is set to “FRONT” (see page 49), you can select only “LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to a setting other than “LARGE” in advance, this unit automatically changes the value to “LARGE”.
Center speaker CENTER SP
Choices: NONE, SML, LRG
1 SOUND MENU
A)SPEAKER SET
CENTER SP
NONE >SML LRG
When the center speaker is large
Select “LRG” (large).
When the center speaker is small
Select “SML” (small).
When you do not use the center speaker
Select “NONE” (none). The center channel signals are directed to the front left and right speakers.