Yamaha RX-V561 owner manual 53 En, Rename, Decoder select mode, DTS decoder prioritize setting

■Input rename B)INPUT RENAME

Use this feature to change the name of the input source that appears in the OSD and in the front panel display.

2 INPUT MENU

B)INPUT RENAME

DVD -> DVD

[p]/[[]:Position [p]/[p]:Chara.

1 Press one of the input selector buttons (C) or A MULTI CH IN to select the input

source you want to change the name of.

MULTI CH IN

CD MD/CD-R TUNER

DVD DTV/CBL DVR

V-AUXUSB

2Press D AMP and then press G l / h on the remote control to place the “_” (underscore) under the space or the character you want to edit.

3Press G k / n to select the character you want to use and then press G l / h to move

to the next space.

Notes

•You can use up to 8 characters for each input.

•Press G n to change the character in the following order, or press G k to go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.)

4Repeat steps 1 through 3 to rename each input source.

5Press G ENTER to exit from “INPUT

RENAME”.

SET MENU

■Volume trim C)VOLUME TRIM

Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, USB,

MULTI CH IN Control range: –6.0 to +6.0 dB Control step: 1.0 dB

Initial setting: 0.0 dB

2 INPUT MENU

C)VOLUME TRIM

DVD

DVD ;;;;;;0.0dB

[p]/[[]:Adjust [RETURN]:Exit

■Decoder mode D)DECODER MODE

2 INPUT MENU

D)DECODER MODE

. >AUTO	LAST
CD	;;;;AUTO
DVD	;;;;AUTO

DTV/CBL ;;;;AUTO

[p]/[p]:Up/Down [p]/[[]:Select

Decoder select mode

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

•Select “LAST” if you want this unit to automatically select the last decoder mode used the connected input source.

DTS decoder prioritize setting

Choices: AUTO, DTS

•Select “AUTO” if you want this unit to automatically detect input signal types and select the appropriate input mode.

•Select “DTS” when you play back a DTS-CD.

OPERATION ADVANCED

English

53 En