Yamaha RX-V561 51 En, Center speaker equalizer Dcenter GEQ, Low-frequency effect level Elfe Level

Page 55

■Center speaker equalizer D)CENTER GEQ

Use this feature to adjust the built-in 5-frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front speakers. You can make adjustments while listening to the currently selected source component or a test tone.

Control range: –6.0 to +6.0 dB

Control step: 0.5 dB

Initial setting: 0 dB

1 SOUND MENU

 

D)CENTER GEQ

 

TEST

>OFF

ON

. 100Hz

;;;;;;

0.0dB

300Hz

;;;;;;

0.0dB

1kHz

;;;;;;

0.0dB

3kHz

;;;;;;

0.0dB

10kHz

;;;;;;

0.0dB

[p]/[p]:Up/Down [p]/[[]:Adjust

Test tone TEST

Use this feature to make adjustments for “CENTER GEQ” while listening to a test tone.

Choices: OFF, ON

•Select “OFF” to stop test tones and output the currently selected source component.

•Select “ON” to output test tones from the center and front left speakers.

■Low-frequency effect level E)LFE LEVEL

Use this feature to adjust the output level of the LFE (low- frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

Control range: –20 to 0 dB

Control step: 1 dB

1 SOUND MENU

E)LFE LEVEL

. SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

[p]/[p]:Up/Down [p]/[[]:Adjust

Speaker SPEAKER

Adjusts the speaker LFE level.

Headphone HEADPHONE

Adjusts the headphone LFE level.

Note

Depending on the settings of “LFE/BASS OUT” (see page 49), some signals may not be output at the SUBWOOFER OUTPUT jack.

SET MENU

■Dynamic range F)D.RANGE

Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding Dolby Digital and DTS signals.

1 SOUND MENU

F)D.RANGE

. SP D.R;;;;MAX HP D.R;;;;MAX

[p]/[p]:Up/Down [p]/[[]:Adjust

Speaker SP

Adjusts the speaker compression.

Headphone HP

Adjusts the headphone compression.

Choices: MIN, STD, MAX

•Select “MIN” (minimum) if you regularly listen at low volume levels.

•Select “STD” (standard) for general use.

•Select “MAX” (maximum) to preserve the greatest amount of dynamic range.

■Audio settings G)AUDIO SET

Use this feature to adjust the overall audio settings of this unit.

1 SOUND MENU

G)AUDIO SET

. MUTE TYPE;;;FULL

A.DELAY;;;;;;0ms

MAX VOL.;;;+16dB

INI.VOL.;;;;;OFF

[p]/[p]:Up/Down [p]/[[]:Adjust

Mute type MUTE TYPE

Use this feature to adjust how much the mute function reduces the output volume (see page 36).

Choices: FULL, –20dB

•Select “FULL” to completely mute all the audio output.

•Select “–20dB” to reduce the current volume by 20 dB.

Audio delay A.DELAY

Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Control range: 0 to 160 ms

Control step: 1 ms

OPERATION

ADVANCED

 

 

English

51 En

Page 54 Page 56
Image 55
Page 54 Page 56
Contents RX-V561 Important safety instructions Example of Antenna Grounding FCC Information for US customersSerial No For Canadian CustomersContents We Want You Listening For a Lifetime FeaturesAM loop antenna Remote controlGetting started Check that you received all of the following partsQuick start guide Set up your speakersEnjoy DVD playback Center and surround speakers Connect your DVD player and other components Connect the FM and AM antennas to this unit For further connectionsSee page 20 for the details Press Fscene 2 or Scene 2 to select Disc Listening Using the other Scene buttonsCheck the type of the connected speakers Press FsceneWhat do you want to do with this unit? AC Outlets ConnectionsRear panel 10 En11 En Placing speakersSubwoofer Right Left Front speakers a Connecting speakers12 En Right Left Center Speaker Subwoofer Center speaker13 En Setting the speaker impedanceBefore connecting to the Speakers Terminal Connecting to the Speakers terminalsVideo jacks Information on jacks and cable plugs14 En Audio jacksHdmi cable plug Information on Hdmi15 En Hdmi jack and cable plug16 En Connecting video componentsConnect the video components as follows Video monitor Cable TV or Satellite tuner Connecting to the HDMI, Component Video or S Video jacks17 En Hdmi connectionVideo monitor DVD player 18 EnComponent Video connection Video connection19 En Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder Connecting to the Multi CH Input jacksConnecting the FM and AM antennas Using the Video AUX jacks on the front panel20 En 21 En Connecting the power cableTurning on and off the power Set this unit to the standby mode22 En Front panel display30º Using the remote control23 En Infrared windowUsing Auto Setup Optimizing the speaker setting for your listening room24 En 25 En Top SET Menu display appears in the OSD 26 EnPress G Enter to return to the Autoresult display Press G Enter to confirm your selection27 En If an error screen appearsIf Warning appears Selected Scene template is assigned to the button Selecting the Scene templatesSelecting the desired Scene template 28 EnWhich Scene template would you like to select? 29 En30 En Preset Scene templates descriptionsRenaming the Scene templates Customizing the preset Scene TemplatesCreating your original Scene templates 31 En32 En Quick guide to contentsPlayback Basic operationsSelecting the front speaker set Using the Zone B featureAdditional operations 33 EnEnjoying pure hi-fi stereo sound Adjusting the tonal qualityAdjusting speaker levels during Playback 34 En35 En Selecting the night listening modeDisplaying signal information Press D AMP and then press Q Menu on the remote controlPlaying video sources Background Using your headphonesUsing the sleep timer 36 En37 En Category Program FeaturesSound field programs Sound field program descriptionsPRO Logic Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode 38 EnEditing sound fields parameters 39 EnPress 5PRESET/TUNING l / h once to begin automatic tuning FM/AM tuningAutomatic tuning Manual tuningManual preset tuning Automatic preset tuning41 En Press and hold 2PRESET/TUNING for more than 3 seconds Selecting preset stationsExchanging preset station See Selecting preset stations on thisSupported USB devices Using a USB memory device or a USB portable audio playerPlayback operation 43 EnPlayback icon All all repeat, 1 single repeat icons 44 EnFunction of the play information display Press G Enter to play the selected file45 En RecordingManual setup Manual Setup Auto setup Auto Setup46 En Signal information Signal Info Using SET Menu47 En 48 En Speaker settings Aspeaker SET49 En Unit Unit 50 EnSpeaker level BSP Level Speaker distance CSP DistanceLow-frequency effect level Elfe Level Audio settings Gaudio SET51 En Center speaker equalizer Dcenter GEQInput assignment 52 EnRename Decoder select modeDTS decoder prioritize setting 53 EnDisplay settings Adisplay SET Multi channel input setup54 En Repeat Repeat 55 EnParameter initialization DPARAM. INI USB playback styles Eusb Play Style56 En Remote control featuresUsing remote control on the Scene feature Controlling the input source Components in the Scene modeAMP Controlling this unit, a TV, or other components57 En Controlling this unit Controlling a TVControlling other components 58 En59 En Setting remote control codesRemote control code default settings Input Component Manufacturer DefaultSpeaker impedance SP IMP Advanced setupFactory presets Preset 60 EnGeneral TroubleshootingProblem Cause Remedy See 61 En62 En 63 En Problem Cause RemedyTuner Before Auto SetupError message Cause Remedy See 64 EnAfter Auto Setup During Auto Setup65 En Status message Cause Remedy 66 EnPress Bstraight repeatedly to select Reset Remote controlResetting the system Advanced setup menu appears in the front panel display68 En GlossaryAudio information MP3 69 EnSound field program information Video information70 En Specifications71 En IndexNumerics Headphone 72 EnSpeaker 73 EnFront panel/Face avant Remote control/Boîtier de télécommande Iii List of remote control codes Liste des codes de commandeInternational Manesth VCR TV/DVD/VCR ComboTV/VCR Combo DVD/VCR ComboDVD LD Player DVD/LD ComboDVD Recorder DVRRX-V561 Menu Volume
Top Page Image Contents