Yamaha RX-V563 owner manual Specifications, 97 En

Page 101

Specifications

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround Back

[U.S.A. and Canada models]

1 kHz, 0.9% THD, 8 Ω

90 W

[Other models]

 

1 kHz, 0.9% THD, 6 Ω

90 W

•Maximum Power for Front, Center, Surround, Surround Back (JEITA)

[U.S.A. and Canada models]

1 kHz, 10% THD, 8 Ω

115 W

[Other models]

 

1 kHz, 10% THD, 6 Ω

115 W

• Dynamic Power

 

[U.S.A. and Canada models]

 

(IHF, 8/6/4/2 Ω)

90/110/130/150 W

[Other models]

 

(IHF, 6/4/2 Ω)

100/110/125 W

• Dynamic Headroom [U.S.A. and Canada models]

8 Ω

0.18 dB

• Maximum Input Signal

 

CD, etc. Effect On, 1 kHz, 0.5% THD

2.0 V or more

• Frequency Response

 

CD, etc. to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

[U.S.A. and Canada models]

 

(1 kHz, 50 W, Front L/R, 8 Ω )

0.06% or less

[Other models]

 

(1 kHz, 50 W, Front L/R, 6 Ω )

0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

CD (200 mV) to Front L/R, Effect Off

98 dB or more

CD (250 mV) to Front L/R, Effect Off

100 dB or more

• Residual Noise (IHF-A Network)

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

CD, etc. (5.1 kΩ shorted) to Front L/R

 

...................................................................

60 dB/45 dB or more

• Tone Control (Front L/R)

 

BASS Boost/Cut

±10 dB/100 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

• Headphone Jack Rated Output/Inpedance

400 mV/470 Ω

• Input Sensitivity/Input.................................................................Impedance

200 mV/47 kΩ

CD, etc.

MULTI CH INPUT

200 mV/47 kΩ

• Output Level/Output Impedance

200 mV/1.2 kΩ

AUDIO OUT (REC)

SUBWOOFER OUTPUT

4 V/1.2 kΩ

•Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP, SUR. B L/R SP:

SMALL/SML)

12 dB/oct.

L.P.F. (Subwoofer)

24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray back)

 

[U.S.A., Canada, Korea and General models]

.................... NTSC

[Other models]

PAL

• Video Signal Type (Video Conversion)

NTSC/PAL

• Signal Level

1 Vp-p/75 Ω

Composite

S-video

1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)

Component

1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)

• Signal to Noise Ratio

50 dB or more

• Maximum Input Level

1.5 Vp-p or more

• Frequency Response (MONITOR OUT)

Component Signal

5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

........................... 87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono

2.8 µV (20.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

73 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.5%/0.5%

• Antenna Input (unbalanced)

75 Ω

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.............................. 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

GENERAL

• Power Supply

 

[U.S.A. and Canada models]

120 V AC, 60 Hz

[Australia model]

240 V AC, 50 Hz

[Korea model]

220 V AC, 60 Hz

[China model]

220 V AC, 50 Hz

[Asia and General models]

 

.............................................. 110-120/220-240 V AC, 50/60 Hz

• Power Consumption

 

[U.S.A. and Canada models]

240 W/320 VA

[General model]

260 W

[Other models]

240 W

• Standby Power Consumption

0.8 W or less

• Maximum Power Consumption [Asia and General models only]

5ch, 10% THD

490 W

• AC Outlets

 

[Australia model]

1 (100 W maximum)

[U.S.A., Canada and China models] ...

2 (Total 100 W maximum)

[Other model]

2 (Total 50 W maximum)

• Dimensions (W x H x D)

435 x 151 x 352 mm

(17-1/8” x 5-15/16” x 13-7/8”)

• Weight

9.0 kg (19 lbs 13 oz)

* Specifications are subject to change without notice.

INFORMATION

ADDITIONAL

 

 

English

97 En

Page 100 Page 102
Image 101
Page 100 Page 102
Contents RX-V563 Important Safety Instructions Example of Antenna Grounding FCC Information for US customersSerial No For Canadian CustomersContents Features Installing batteries in the remote control Supplied accessoriesGetting started We Want You Listening For a LifetimeQuick start guide Set up your speakersPreparation Check the items Press Scene 1 button Enjoy DVD playbackConnect the subwoofer cable to the input Surround and surround back speakersJack of the subwoofer and the Subwoofer Output jack of this unitFor further connections Press Scene 1 button Using the other Scene buttonsAbout Scene function Check the type of the connected speakersWhat do you want to do with this unit? Rear panel ConnectionsName S.A. model10 En Placing speakersFront B terminals Connecting speakers11 En Connecting to the Front a terminals Before connecting to the Speakers TerminalUsing bi-amplification connections 12 En13 En Information on jacks and cable plugsAudio jacks Video jacksInformation on Hdmi Audio signal Compatible14 En Hdmi compatibility with this unitAudio signal flow Audio and video signal flowVideo signal flow 15 En16 En Connecting video componentsConnecting a DVD player Connecting other components17 En DVD playerConnecting a set-top box Connecting a DVD recorder, PVR or VCR18 En DVD recorder PVR or VCRConnecting a CD player and a CD recorder/MD recorder Connecting audio componentsConnecting a multi-format player or an external decoder 19 EnCD or DVD Using Remote IN/OUT jacks20 En 21 En Using the Video AUX jacks on the front panelConnecting the FM and AM antennas Connecting the wire of the AM loop antenna Connecting the power cable22 En Assembling the supplied AM loop antennaTurning on and off the power Setting the speaker impedanceSet this unit to the standby mode 23 En24 En Front panel display25 En Using the remote control26 En Optimizing the speaker setting for your listening roomUsing Auto Setup 27 En Number of speakers SP 28 EnSpeaker distance Dist Speaker level LVLPress 8n and then press 8l / h to select SET or Cancel If an error screen appears29 En If Warning appearsSelecting the desired Scene template Selecting the Scene templates30 En Selected Scene template is assigned to the buttonWhich Scene template would you like to select? 31 En32 En Preset Scene templates descriptionsCreating your original Scene templates Customizing the preset Scene Templates33 En Renaming the Scene templates34 En Using remote control on the Scene featureControlling the input source Components in the Scene mode Playback Quick guide to contentsBasic operations 35 En36 En Selecting audio input jacksSelecting the Multi CH Input component Muting the audio output Using your headphones37 En Current status screen appears in the OSD38 En Displaying the input source informationAudio information Video information39 En Using the sleep timer40 En Sound field programsSound field program descriptions 41 En Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode Editing sound fields parameters 42 EnAdjusting the tonal quality Using audio featuresAdjusting the speaker level Enjoying high quality sound44 En Selecting the night listening modeAutomatic tuning FM/AM tuningManual tuning 45 En46 En Automatic preset tuningManual preset tuning Exchanging preset station Selecting preset stationsSee Selecting preset stations on this Press and hold D PRESET/TUNING for more than 3 seconds48 En XM Satellite Radio tuningXM Satellite Radio online information XM Ready legal disclaimer49 En Activating XM Satellite RadioBasic XM Satellite Radio operations Category Search mode All Channel Search modePreset Search mode Direct Number Access mode51 En Setting XM Satellite Radio preset channelsPreset channel number appears in the front panel display Displaying the XM Satellite Radio information in the OSD Displaying the XM Satellite Radio information52 En Connecting the SiriusConnect tuner Sirius Satellite Radio tuning53 En Sirius Satellite Radio legal disclaimerBasic Sirius Satellite Radio operations Activating Sirius Satellite Radio subscription54 En Displaying the Sirius ID of your SiriusConnect tuner55 En PRESET/TUNING/CH l/ h or 8PRESET/CH k/ nPRESET/TUNING/CH l/ hor 8PRESET/CH k/ n Setting the code number and the locked Channels Setting the Parental LockTUNING/CH l/ hor 8PRESET/CH k/ n 56 En57 En Tuning into the locked channelsPress 8ENTER to confirm the code number Press 8ENTER to lock the selected channelPress I Info or Odisplay 58 EnALL PopRemote control operation Using iPodControlling iPod in the simple remote Mode Controlling iPodFunction of the play information display Controlling iPod in the menu browse Mode60 En Playback of the Bluetooth Using Bluetooth componentsPairing by using SET Menu Quick pairing62 En Recording63 En Auto setup Auto SetupManual setup Manual Setup 64 En Using SET MenuSignal information Signal Info 65 En Speaker settings Aspeaker SET66 En 67 En Subwoofer phase Subwoofer PhaseSpeaker level BSP Level Crossover CrossoverSpeaker distance CSP Distance 68 EnCenter speaker equalizer Dcenter GEQ Low-frequency effect level Elfe Level69 En Audio settings Gaudio SET70 En Extended decoder select modeExtended surround Iextd SUR Support audio S.AUDIOInput assignment 71 EnFor Coaxial Input jack For Optical Input jacks 272 En Multi channel input setup73 En Display settings Adisplay SETParameter initialization DPARAM. INI 74 EnMemory guard Bmemory Guard Audio select Caudio SelectXM Radio setting FXM Radio SET A. and Canada models only Bluetooth setting Ebluetooth SETSirius Satellite Radio setting 75 EnControlling this unit, a TV, or other components Remote control features76 En Controlling this unitControlling other components 77 EnRemote control code default settings Setting remote control codesInput Component Manufacturer Default 78 EnConnecting Zone Using multi-zone configurationUsing the external amplifier 79 EnControlling Zone 2 with the front panel Controlling Zone80 En Turning on Zone While pressing and holding 5AMP, press Controlling Zone 2 with the remote control81 En Bi-amplifier setting BI-AMP Advanced setup82 En Speaker impedance SP IMP A. and Canada models only83 En Scene IR code setting Scene IRTuner frequency step TU Asia and General models only Initializing InitProblem Cause Remedy See Troubleshooting84 En General85 En Problem Cause Remedy86 En Tuner 87 EnXM Satellite Radio 88 EnSirius Satellite Radio 89 En90 En Before Auto SetupDuring Auto Setup 1OUT of Phase After Auto Setup3LEVEL Error 91 En92 En BluetoothResetting the system Remote controlAdvanced setup menu appears in the front panel display 93 En94 En Glossary95 En Virtual Cinema DSP Video signal96 En 97 En SpecificationsIndex Symbols98 En Numerics99 En 9INTERNAL ErrorPlaying video sources 100 EnXM Antenna 101 EnBCD E F IJ K Front panelPower Sirius Mute MD/CD-R Tuner DVD DTV/CBL DVR Iii List of remote control codesCCE NEI TV/DVD STS Front panel/Face avant RX-V563Remote control/Boîtier de télécommande
Top Page Image Contents