Troubleshooting
■AUTO SETUP
Before AUTO SETUP
Error message | Cause | Remedy | See | |
page | ||||
|
|
| ||
Connect MIC! | Optimizer microphone is not connected. | Connect the supplied optimizer microphone |
| |
|
| to the OPTIMIZER MIC jack on the front | 26 | |
|
| panel. |
| |
|
|
|
| |
Unplug HP! | Headphones are connected. | Unplug the headphones. | — | |
|
|
|
| |
During AUTO SETUP |
|
|
| |
|
|
|
| |
Error message | Cause | Remedy | See | |
page | ||||
|
|
| ||
Front L/R channel signals are not detected. | Check the front L/R speaker connections. | 11 | ||
|
|
|
| |
A surround channel signal is not detected. | Check the surround speaker connections. | 11 | ||
|
|
|
| |
| Only a right surround back channel signal is | Connect the surround back speaker to the | 11 | |
| detected. | LEFT SURROUND BACK SPEAKERS |
| |
|
| terminal if you only have one surround |
| |
|
| back speaker. |
|
| Background noise is too loud. |
Try running “AUTO SETUP” in a quiet | — |
environment. |
|
|
|
Turn off noisy electric equipment like air | — |
conditioners or move them away from the |
|
optimizer microphone. |
|
| Surround back speakers are connected, | Connect surround speakers when you use | 11 |
| though surround L/R speakers are not. | surround back speakers. |
|
|
|
|
|
| The optimizer microphone was unplugged | Connect the supplied optimizer microphone | 26 |
| during the “AUTO SETUP” procedure. | to OPTIMIZER MIC jack on the front |
|
|
| panel. |
|
|
|
|
|
| The optimizer microphone does not detect | Check the microphone setting. | 26 |
| test tones. |
|
|
| Check the speaker connections and | 10, 11, | |
|
| ||
|
| placement. | 26 |
|
|
|
|
The “AUTO SETUP” procedure was | Run “AUTO SETUP” again. | 26 | |
| cancelled due to user activity. |
|
|
|
|
|
|
An internal error occurred. | Run “AUTO SETUP” again. | 26 | |
|
|
|
|