Yamaha RX-V563 50 En, All Channel Search mode, Category Search mode, Preset Search mode

XM Satellite Radio tuning

y

Before performing operations, press 3XM to select “XM” as the input source.

■All Channel Search mode

1Press D SEARCH MODE (or MSRCH MODE) repeatedly to select “ALL CH

SEARCH”.

2Press G PRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to search for a channel within all channels.

y

•You can search for a channel quickly by pressing and holding

G PRESET/TUNING/CH l / h (or 8PRESET/CH k/ n).

•To display the XM Radio ID number displayed in the front panel display, select channel “0”.

■Category Search mode

1Press D SEARCH MODE (or MSRCH MODE) repeatedly to select “CAT SEARCH”.

2Press F CATEGORY (or 8A-E/CAT.l / h) repeatedly to change the channel category.

3Press G PRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to search for a channel within the selected channel category.

y

You can search for a channel quickly by pressing and holding

GPRESET/TUNING/CH l/ h(or 8PRESET/CH k / n).

■Preset Search mode

Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting XM Satellite Radio preset channels” on page 51.

y

All preset channels (A1 to E8) recalls “001 Preview” by the initial factory setting.

1Press D SEARCH MODE (or MSRCH MODE) repeatedly to select “PRESET

SEARCH”.

2Press F CATEGORY (or 8A-E/CAT.l / h) repeatedly to change the preset channel group (A to E).

3Press G PRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to change the preset channel number (1 to 8).

y

You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) on the remote control.

■Direct Number Access mode

1Press MSRCH MODE repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”.

2Press the numeric buttons (G) to enter the desired three-digit channel number.

For example, to enter the number 123, press the numeric buttons as shown below.

1 2 3

The display changes as follows.

<XM> --1

<XM> -12

<XM>123

y

•To enter a one-digit or two-digit channel number, press the numeric buttons (G) and then press TENT to confirm the input number. Instead of pressing TENT to tune into the channel immediately, you can wait a few seconds until this unit confirms the entered channel number.

•Pressing a button other than the numeric buttons (G) or TENT cancels the Direct Number Access mode procedure.

50 En