Yamaha RX-V563 owner manual 95 En

Page 99

■Dolby Surround

Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range. Dolby Surround is widely used with nearly all video tapes and laser discs, and in many TV and cable broadcasts as well. The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality.

■DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality for multi-channel sound on DVD video, and is fully backward-compatible with all DTS decoders. “96” refers to a 96 kHz sampling rate compared to the typical 48 kHz sampling rate. “24” refers to 24-bit word length. DTS 96/ 24 offers sound quality transparent to the original 96/24 master, and 96/24 5.1-channel sound with full-quality full- motion video for music programs and motion picture soundtracks on DVD video.

■DTS Digital Surround

DTS digital surround was developed to replace the analog soundtracks of movies with a 6.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 6.1-channel sound (technically, front left and right, center, surround left and right, and LFE 0.1 (subwoofer) channels for a total of 5.1 channels). This unit incorporates a DTS-ES decoder that enables 6.1-channel reproduction by adding the surround back channel to the existing 5.1-channel format.

■HDMI

HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multi-channel digital audio using a single cable. HDMI transmits all ATSC HDTV standards and supports 8- channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements. When used in combination with HDCP (High-bandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website at “http://www.hdmi.org/”.

Glossary

■LFE 0.1 channel

This channel reproduces low-frequency signals. The frequency range of this channel is from 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduced by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

■Neo:6

Neo:6 decodes the conventional 2-channel sources for 6- channel playback by the specific decoder. It enables playback with the full-range channels with higher separation just like digital discrete signal playback. There are two modes available: “Music mode” for music sources and “Cinema mode” for movie sources.

■Neural Surround

Neural Surround™ represents the latest advancement in surround technology and has been adopted by XM Satellite Radio for digital radio broadcast of surround recordings and live events in surround sound. Neural Surround™ employs psychoacoustic frequency domain processing which allows delivery of a more detailed sound stage with superior channel separation and localization of audio elements. System playback is scalable from 5.1 to 7.1 multi-channel surround playback.

■PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “Pulse Code Modulation”, the analog signal is encoded as pulses and then modulated for recording.

■Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more finely the sound level can be reproduced.

INFORMATION

ADDITIONAL

 

 

English

95 En

Page 98 Page 100
Image 99
Page 98 Page 100
Contents RX-V563 Important Safety Instructions Example of Antenna Grounding FCC Information for US customersSerial No For Canadian CustomersContents Features We Want You Listening For a Lifetime Supplied accessoriesInstalling batteries in the remote control Getting startedPress Scene 1 button Enjoy DVD playback Set up your speakersQuick start guide Preparation Check the itemsOutput jack of this unit Surround and surround back speakersConnect the subwoofer cable to the input Jack of the subwoofer and the SubwooferFor further connections Check the type of the connected speakers Using the other Scene buttonsPress Scene 1 button About Scene functionWhat do you want to do with this unit? S.A. model ConnectionsRear panel Name10 En Placing speakersConnecting speakers 11 EnFront B terminals 12 En Before connecting to the Speakers TerminalConnecting to the Front a terminals Using bi-amplification connectionsVideo jacks Information on jacks and cable plugs13 En Audio jacksHdmi compatibility with this unit Audio signal CompatibleInformation on Hdmi 14 En15 En Audio and video signal flowAudio signal flow Video signal flow16 En Connecting video componentsDVD player Connecting other componentsConnecting a DVD player 17 EnDVD recorder PVR or VCR Connecting a DVD recorder, PVR or VCRConnecting a set-top box 18 En19 En Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder Connecting a multi-format player or an external decoderUsing Remote IN/OUT jacks 20 EnCD or DVD Using the Video AUX jacks on the front panel Connecting the FM and AM antennas21 En Assembling the supplied AM loop antenna Connecting the power cableConnecting the wire of the AM loop antenna 22 En23 En Setting the speaker impedanceTurning on and off the power Set this unit to the standby mode24 En Front panel display25 En Using the remote controlOptimizing the speaker setting for your listening room Using Auto Setup26 En 27 En Speaker level LVL 28 EnNumber of speakers SP Speaker distance DistIf Warning appears If an error screen appearsPress 8n and then press 8l / h to select SET or Cancel 29 EnSelected Scene template is assigned to the button Selecting the Scene templatesSelecting the desired Scene template 30 EnWhich Scene template would you like to select? 31 En32 En Preset Scene templates descriptionsRenaming the Scene templates Customizing the preset Scene TemplatesCreating your original Scene templates 33 EnUsing remote control on the Scene feature Controlling the input source Components in the Scene mode34 En 35 En Quick guide to contentsPlayback Basic operationsSelecting audio input jacks Selecting the Multi CH Input component36 En Current status screen appears in the OSD Using your headphonesMuting the audio output 37 EnVideo information Displaying the input source information38 En Audio information39 En Using the sleep timerSound field programs Sound field program descriptions40 En Enjoying 2-channel sources using Standard decoders Enjoying unprocessed input sources Straight decoding mode41 En Editing sound fields parameters 42 EnEnjoying high quality sound Using audio featuresAdjusting the tonal quality Adjusting the speaker level44 En Selecting the night listening mode45 En FM/AM tuningAutomatic tuning Manual tuningAutomatic preset tuning Manual preset tuning46 En Press and hold D PRESET/TUNING for more than 3 seconds Selecting preset stationsExchanging preset station See Selecting preset stations on thisXM Ready legal disclaimer XM Satellite Radio tuning48 En XM Satellite Radio online informationActivating XM Satellite Radio Basic XM Satellite Radio operations49 En Direct Number Access mode All Channel Search modeCategory Search mode Preset Search modeSetting XM Satellite Radio preset channels Preset channel number appears in the front panel display51 En Displaying the XM Satellite Radio information 52 EnDisplaying the XM Satellite Radio information in the OSD Sirius Satellite Radio legal disclaimer Sirius Satellite Radio tuningConnecting the SiriusConnect tuner 53 EnDisplaying the Sirius ID of your SiriusConnect tuner Activating Sirius Satellite Radio subscriptionBasic Sirius Satellite Radio operations 54 EnPRESET/TUNING/CH l/ h or 8PRESET/CH k/ n PRESET/TUNING/CH l/ hor 8PRESET/CH k/ n55 En 56 En Setting the Parental LockSetting the code number and the locked Channels TUNING/CH l/ hor 8PRESET/CH k/ nPress 8ENTER to lock the selected channel Tuning into the locked channels57 En Press 8ENTER to confirm the code numberPop 58 EnPress I Info or Odisplay ALLControlling iPod Using iPodRemote control operation Controlling iPod in the simple remote ModeControlling iPod in the menu browse Mode 60 EnFunction of the play information display Quick pairing Using Bluetooth componentsPlayback of the Bluetooth Pairing by using SET Menu62 En RecordingAuto setup Auto Setup Manual setup Manual Setup63 En Using SET Menu Signal information Signal Info64 En 65 En Speaker settings Aspeaker SET66 En Crossover Crossover Subwoofer phase Subwoofer Phase67 En Speaker level BSP LevelLow-frequency effect level Elfe Level 68 EnSpeaker distance CSP Distance Center speaker equalizer Dcenter GEQ69 En Audio settings Gaudio SETSupport audio S.AUDIO Extended decoder select mode70 En Extended surround Iextd SURFor Optical Input jacks 2 71 EnInput assignment For Coaxial Input jack72 En Multi channel input setup73 En Display settings Adisplay SETAudio select Caudio Select 74 EnParameter initialization DPARAM. INI Memory guard Bmemory Guard75 En Bluetooth setting Ebluetooth SETXM Radio setting FXM Radio SET A. and Canada models only Sirius Satellite Radio settingControlling this unit Remote control featuresControlling this unit, a TV, or other components 76 EnControlling other components 77 En78 En Setting remote control codesRemote control code default settings Input Component Manufacturer Default79 En Using multi-zone configurationConnecting Zone Using the external amplifierControlling Zone 80 EnControlling Zone 2 with the front panel Controlling Zone 2 with the remote control 81 EnTurning on Zone While pressing and holding 5AMP, press Speaker impedance SP IMP A. and Canada models only Advanced setupBi-amplifier setting BI-AMP 82 EnInitializing Init Scene IR code setting Scene IR83 En Tuner frequency step TU Asia and General models onlyGeneral TroubleshootingProblem Cause Remedy See 84 En85 En Problem Cause Remedy86 En Tuner 87 EnXM Satellite Radio 88 EnSirius Satellite Radio 89 EnBefore Auto Setup During Auto Setup90 En 91 En After Auto Setup1OUT of Phase 3LEVEL Error92 En Bluetooth93 En Remote controlResetting the system Advanced setup menu appears in the front panel display94 En Glossary95 En Video signal 96 EnVirtual Cinema DSP 97 En SpecificationsNumerics SymbolsIndex 98 En99 En 9INTERNAL ErrorPlaying video sources 100 EnXM Antenna 101 EnBCD E F IJ K Front panelPower Sirius Mute MD/CD-R Tuner DVD DTV/CBL DVR Iii List of remote control codesCCE NEI TV/DVD STS Front panel/Face avant RX-V563Remote control/Boîtier de télécommande
Top Page Image Contents