Yamaha RX-V563 owner manual 42 En, Editing sound fields parameters

Sound field programs

■Editing sound fields parameters

You can enjoy good quality sound with the factory default parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.

1While listening to a source, press 5AMP and then press SPARAMETER.

2Press 8k/ nto select the desired parameter you want to change.

3Press 8l / h to change the parameter value.

Note

You cannot change parameter values when “MEMORY GUARD” in “OPTION MENU” is set to “ON” (see page 74).

y

Initial settings are indicated in bold under each parameter.

For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic:

DSP level DSP LEVEL

Function:	Adjusts the effect level.
Choices:	MIN, MID, MAX

For 2ch Enhancer and 7ch Enhancer:

Effect level EFFECT LEVEL

Function:	Adjusts the effect level.
Choices:	LOW, HIGH

For Pro Logic II Music and Pro Logic IIx Music:

Panorama PANORAMA

Function:	Sends stereo signals to the surround
	speakers as well as the front speakers for
	a wraparound effect.
Choices:	OFF, ON
Dimension DIMENSION
Function:	Gradually adjusts the sound field either
	towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the

	front), initial setting is STD (standard).
Center width CT WIDTH
Function:	Adjusts the center image from all three
	front speakers to varying degrees. A

larger value adjusts the center image towards the front left and right speakers.

Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from front left and right speakers), initial setting is 3.

For Neo:6 Music

Center image C.IMAGE

Function:	Adjusts the front left and right channel
	output relative to the center channel
	more or less dominant as necessary.

Control range: 0.0 to 1.0, initial setting is 0.3.

42 En