Yamaha CRW3200NB manual Decide the Installation Method, Preparing the CRW3200E Drive

Page 17

Preparing the CRW3200E Drive

The following describes how to install the CRW3200E drive on the computer by taking a tower-type computer for example.

Note

The methods of removing the computer cover or panels and installing an internal device vary depending on the computer model. Refer to the documentation that comes with the computer.

1 Decide the Installation Method

Check the connection of any IDE device installed to decide the installation method of the CRW3200E drive.

Note

•The CRW3200E drive supports Ultra ATA/33. Even if the motherboard and the hard drive support Ultra ATA/66 or Ultra ATA/100, they are operated by Ultra ATA/33 as long as they are connected to the CRW3200E drive by the same IDE cable or the included 40-pin IDE cable.

•Install the CRW3200E drive horizontally.

1 Turn off and unplug the computer.

While the computer is turned on, it is dangerous to handle the internal computer devices due to the risk of an electrical shock. There is also a risk of damaging the CRW3200E drive, the computer, etc. Be sure to unplug the computer prior to handling any internal computer device.

2 Remove all peripheral devices and cables connected to the computer prior to removing the computer cover.

Clothes and body can become charged with static electricity.

Discharge any static electricity by touching a metallic part of the case or power unit.

For more information, refer to the documentation that comes with the computer.

9

Image 17

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii Warranty Table of Contents High speed writing/reading Features of the CRW3200E DriveSafeBurn Enhanced stability writing technology High fidelity digital audioFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelHandling Discs Precautions on UseCopyright Disclaimer of IndemnityDiscs that can be written on Useable discsCD-R discs CD-RW discsPartial CAV Constant Angular Velocity Computer PC/AT compatible System RequirementsImage file Operating system OSSerial Number Preparing the CRW3200E DrivePreparing tools Serial NumberPreparing the CRW3200E Drive Decide the Installation MethodReplacing an existing IDE device with the CRW3200E drive Installing the CRW3200E drive as an additional driveExample 1 As a secondary slave For additional drive Examples of connecting the CRW3200E driveIDE Preparing the CRW3200E Drive Set the Jumper Switch Cable Select Csel Replacing Install the CRW3200E DriveInstalling the CRW3200E drive as an additional drive Connect the included 40-pin IDE cable Audio CD playback Connect an audio cable if necessaryPreparing the CRW3200E Drive Analog connection Spdif Digital connectionTop Power connector Bottom Check Recognition of the CRW3200E Drive When using Windows 95/98/98 Second Edition/MeWhen using Windows XP When using Windows 2000 ProfessionalCheck When using Windows 2000 Professional/XPDMA Direct Memory Access Install CD Writing SoftwareLoading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a DiscIs the computer turned on? TroubleshootingIs the disc tray opened when the computer is restarted? Disc tray does not open when you press the eject buttonIs each IDE device set respectively? Is any CD writing software being used?No data can be read from a disc Disc is ejected without order or it comes out spontaneouslyFor Windows Me Playback of an audio CD CD-DA cannot be heardFor Windows XP Is the power capacity of your computer sufficient? Error message Buffer Underrun is displayedOther problems Checking the firmware version in your CRW3200E drive FirmwareYamaha CD-R/RW Drive website For Windows 95/98/98 Second Edition/MeSupported Formats Write Read Play back *4 CRW3200E Drive SpecificationsData Capacity CRW3200E drive conforms to the following specifications CRW3200E Drive Specifications Safety/EMC ComplianceBuffer Underrun Protection Function Technical NotesWriting Methods Disc-at-Once DAOSession-at-Once SAO Track-at-Once TAOPacket Writing Canada