Yamaha CRW3200NB manual Connect the included 40-pin IDE cable

Page 25

Preparing the CRW3200E Drive

2 Install the CRW3200E drive carefully into the drive bay and temporarily fasten the screws by hand.

Be sure that there is enough space to connect the 4-pin internal power cable, 40-pin IDE cable, and audio cable prior to temporarily fastening the included four screws to the fixed position.

Install the CRW3200E drive carefully into the drive bay from the front

Note

Do not apply excessive force to the CRW3200E drive.

3 Connect the included 40-pin IDE cable.

Connect the included 40-pin IDE cable to the IDE connector on the motherboard and the IDE interface connector on the rear panel of the CRW3200E drive. Be sure that the colored wire is connected to the first pin of the IDE connector, as shown in the diagram below.

	Motherboard
1	IDE connector
	40-pin IDE	IDE interface
	cable provided	IDE interface
	Colored wire	connector
	Colored wire

17

Image 25

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii Warranty Table of Contents High speed writing/reading Features of the CRW3200E DriveSafeBurn Enhanced stability writing technology High fidelity digital audioFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelHandling Discs Precautions on UseCopyright Disclaimer of IndemnityDiscs that can be written on Useable discsCD-R discs CD-RW discsPartial CAV Constant Angular Velocity Computer PC/AT compatible System RequirementsImage file Operating system OSSerial Number Preparing the CRW3200E DrivePreparing tools Serial NumberPreparing the CRW3200E Drive Decide the Installation MethodReplacing an existing IDE device with the CRW3200E drive Installing the CRW3200E drive as an additional driveExample 1 As a secondary slave For additional drive Examples of connecting the CRW3200E driveIDE Preparing the CRW3200E Drive Set the Jumper Switch Cable Select Csel Installing the CRW3200E drive as an additional drive Install the CRW3200E DriveReplacing Connect the included 40-pin IDE cable Audio CD playback Connect an audio cable if necessaryPreparing the CRW3200E Drive Analog connection Spdif Digital connectionTop Power connector Bottom Check Recognition of the CRW3200E Drive When using Windows 95/98/98 Second Edition/MeWhen using Windows XP When using Windows 2000 ProfessionalCheck When using Windows 2000 Professional/XPDMA Direct Memory Access Install CD Writing SoftwareLoading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a DiscIs the computer turned on? TroubleshootingIs the disc tray opened when the computer is restarted? Disc tray does not open when you press the eject buttonIs each IDE device set respectively? Is any CD writing software being used?No data can be read from a disc Disc is ejected without order or it comes out spontaneouslyFor Windows Me Playback of an audio CD CD-DA cannot be heardFor Windows XP Other problems Error message Buffer Underrun is displayedIs the power capacity of your computer sufficient? Checking the firmware version in your CRW3200E drive FirmwareYamaha CD-R/RW Drive website For Windows 95/98/98 Second Edition/MeSupported Formats Write Read Play back *4 CRW3200E Drive SpecificationsData Capacity CRW3200E drive conforms to the following specifications CRW3200E Drive Specifications Safety/EMC ComplianceBuffer Underrun Protection Function Technical NotesWriting Methods Disc-at-Once DAOSession-at-Once SAO Track-at-Once TAOPacket Writing Canada