Yamaha CRW3200NB manual Preparing the CRW3200E Drive Analog connection

Page 27

Preparing the CRW3200E Drive

Analog connection

Connect one end of the included audio cable (the end with one connector) to the analog audio output jack on the rear panel of the CRW3200E drive. Be sure that the connector is in the correct direction prior to connecting it. There are two types of connectors at the other end of the audio cable.

Select the one that fits the sound card: Vertical connector (PH) and Horizontal connector (MPC).

Check the direction of the connector vertically and horizontally prior to connecting it to the sound card. (Only use one of the two connectors, and leave the other free.)

Analog audio output jack

Left channel (L)

Ground (G)

Right channel (R)

Vertical connector (PH)

Audio cable (included)

Horizontal connector (MPC)

Sound card

Audio input jack

Note

•Some sound cards have more than one audio input jack, including those which do not support the specification of the CRW3200E drive.

•If you cannot hear playback audio from the speakers, refer to the documentation that comes with the sound card.

19

Image 27

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii Warranty Table of Contents High fidelity digital audio Features of the CRW3200E DriveHigh speed writing/reading SafeBurn Enhanced stability writing technologyFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelDisclaimer of Indemnity Precautions on UseHandling Discs CopyrightCD-RW discs Useable discsDiscs that can be written on CD-R discsPartial CAV Constant Angular Velocity Operating system OS System RequirementsComputer PC/AT compatible Image fileSerial Number Preparing the CRW3200E DriveSerial Number Preparing toolsPreparing the CRW3200E Drive Decide the Installation MethodReplacing an existing IDE device with the CRW3200E drive Installing the CRW3200E drive as an additional driveExample 1 As a secondary slave For additional drive Examples of connecting the CRW3200E driveIDE Preparing the CRW3200E Drive Set the Jumper Switch Cable Select Csel Install the CRW3200E Drive Installing the CRW3200E drive as an additional driveReplacing Connect the included 40-pin IDE cable Audio CD playback Connect an audio cable if necessaryPreparing the CRW3200E Drive Analog connection Spdif Digital connectionTop Power connector Bottom Check Recognition of the CRW3200E Drive When using Windows 95/98/98 Second Edition/MeWhen using Windows XP When using Windows 2000 ProfessionalCheck When using Windows 2000 Professional/XPDMA Direct Memory Access Install CD Writing SoftwareLoading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a DiscIs the computer turned on? TroubleshootingIs any CD writing software being used? Disc tray does not open when you press the eject buttonIs the disc tray opened when the computer is restarted? Is each IDE device set respectively?No data can be read from a disc Disc is ejected without order or it comes out spontaneouslyFor Windows Me Playback of an audio CD CD-DA cannot be heardFor Windows XP Error message Buffer Underrun is displayed Other problemsIs the power capacity of your computer sufficient? For Windows 95/98/98 Second Edition/Me FirmwareChecking the firmware version in your CRW3200E drive Yamaha CD-R/RW Drive websiteSupported Formats Write Read Play back *4 CRW3200E Drive SpecificationsData Capacity CRW3200E drive conforms to the following specifications CRW3200E Drive Specifications Safety/EMC ComplianceDisc-at-Once DAO Technical NotesBuffer Underrun Protection Function Writing MethodsSession-at-Once SAO Track-at-Once TAOPacket Writing Canada