Yamaha CRW3200NB manual Top Power connector Bottom

Page 29

Preparing the CRW3200E Drive

5 Connect the 4-pin internal power cable of the computer (+12V and +5V) to the power connector on the rear panel of the CRW3200E drive.

Top

	Power connector
Bottom	4-pin internal power cable
	4-pin internal power cable

Note

The 4-pin internal power cable cannot be connected if it is upside down. If the connector does not connect easily, check that it is in the correct direction.

6 Tighten four screws which fastened by hand.

7 Attach the computer cover and reconnect the peripheral devices and cables as before.

21

Image 29

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii Warranty Table of Contents High speed writing/reading Features of the CRW3200E DriveSafeBurn Enhanced stability writing technology High fidelity digital audioFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelHandling Discs Precautions on UseCopyright Disclaimer of IndemnityDiscs that can be written on Useable discsCD-R discs CD-RW discsPartial CAV Constant Angular Velocity Computer PC/AT compatible System RequirementsImage file Operating system OSSerial Number Preparing the CRW3200E DrivePreparing tools Serial NumberPreparing the CRW3200E Drive Decide the Installation MethodReplacing an existing IDE device with the CRW3200E drive Installing the CRW3200E drive as an additional driveExample 1 As a secondary slave For additional drive Examples of connecting the CRW3200E driveIDE Preparing the CRW3200E Drive Set the Jumper Switch Cable Select Csel Replacing Install the CRW3200E DriveInstalling the CRW3200E drive as an additional drive Connect the included 40-pin IDE cable Audio CD playback Connect an audio cable if necessaryPreparing the CRW3200E Drive Analog connection Spdif Digital connectionTop Power connector Bottom Check Recognition of the CRW3200E Drive When using Windows 95/98/98 Second Edition/MeWhen using Windows XP When using Windows 2000 ProfessionalCheck When using Windows 2000 Professional/XPDMA Direct Memory Access Install CD Writing SoftwareLoading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a DiscIs the computer turned on? TroubleshootingIs the disc tray opened when the computer is restarted? Disc tray does not open when you press the eject buttonIs each IDE device set respectively? Is any CD writing software being used?No data can be read from a disc Disc is ejected without order or it comes out spontaneouslyFor Windows Me Playback of an audio CD CD-DA cannot be heardFor Windows XP Is the power capacity of your computer sufficient? Error message Buffer Underrun is displayedOther problems Checking the firmware version in your CRW3200E drive FirmwareYamaha CD-R/RW Drive website For Windows 95/98/98 Second Edition/MeSupported Formats Write Read Play back *4 CRW3200E Drive SpecificationsData Capacity CRW3200E drive conforms to the following specifications CRW3200E Drive Specifications Safety/EMC ComplianceBuffer Underrun Protection Function Technical NotesWriting Methods Disc-at-Once DAOSession-at-Once SAO Track-at-Once TAOPacket Writing Canada