Yamaha CRW3200NB manual Check Recognition of the CRW3200E Drive

Page 30

4Check Recognition of the CRW3200E Drive

1 Plug in and turn on the computer.

LED blinks blue, then lights purple.

Check that the LED on the front panel blinks blue, and then lights purple.

2 Check that the CRW3200E drive is properly recognized by Windows.

The operation varies depending on your operating system.

When using Windows 95/98/98 Second Edition/Me

1Select Start on the taskbar, then Settings, Control Panel, System, and Device Manager tab. The Device Manager dialog box appears.

Note

For Windows Me, if the System icon is not found in the Control Panel

window, click view all Control Panel options on the left side of the

window.

2If there is to the left of CD-ROM, click .

YAMAHA CRW3200E should be shown when the CRW3200E drive has been recognized properly.

“YAMAHA CRW3200E” is shown.

Continued on next page

22

Image 30

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii Warranty Table of Contents SafeBurn Enhanced stability writing technology Features of the CRW3200E DriveHigh speed writing/reading High fidelity digital audioNames and Functions of Parts Front PanelRear Panel Names and Functions of PartsCopyright Precautions on UseHandling Discs Disclaimer of IndemnityCD-R discs Useable discsDiscs that can be written on CD-RW discsPartial CAV Constant Angular Velocity Image file System RequirementsComputer PC/AT compatible Operating system OSPreparing tools Preparing the CRW3200E DriveSerial Number Serial NumberDecide the Installation Method Preparing the CRW3200E DriveInstalling the CRW3200E drive as an additional drive Replacing an existing IDE device with the CRW3200E driveExamples of connecting the CRW3200E drive Example 1 As a secondary slave For additional driveIDE Preparing the CRW3200E Drive Set the Jumper Switch Cable Select Csel Install the CRW3200E Drive Installing the CRW3200E drive as an additional driveReplacing Connect the included 40-pin IDE cable Connect an audio cable if necessary Audio CD playbackPreparing the CRW3200E Drive Analog connection Digital connection SpdifTop Power connector Bottom When using Windows 95/98/98 Second Edition/Me Check Recognition of the CRW3200E DriveWhen using Windows 2000 Professional When using Windows XPWhen using Windows 2000 Professional/XP CheckInstall CD Writing Software DMA Direct Memory AccessLoading/Ejecting a Disc Manually Ejecting a Disc Loading/Ejecting a DiscTroubleshooting Is the computer turned on?Is each IDE device set respectively? Disc tray does not open when you press the eject buttonIs the disc tray opened when the computer is restarted? Is any CD writing software being used?Disc is ejected without order or it comes out spontaneously No data can be read from a discPlayback of an audio CD CD-DA cannot be heard For Windows MeFor Windows XP Error message Buffer Underrun is displayed Other problemsIs the power capacity of your computer sufficient? Yamaha CD-R/RW Drive website FirmwareChecking the firmware version in your CRW3200E drive For Windows 95/98/98 Second Edition/MeCRW3200E Drive Specifications Supported Formats Write Read Play back *4Data Capacity CRW3200E Drive Specifications Safety/EMC Compliance CRW3200E drive conforms to the following specificationsWriting Methods Technical NotesBuffer Underrun Protection Function Disc-at-Once DAOTrack-at-Once TAO Session-at-Once SAOPacket Writing Canada