Yamaha CRW3200NB manual For Windows XP

3Start “Windows Media Player.” In the menu bar, select Tools, Options and CD Audio tab.

4Uncheck the “Digital playback” in the “Playback Settings” item.

Uncheck

(This screen is an example on Windows Media Player 7.0.)

For Windows XP

1Follow the steps 1 and 2 on the page 31, and uncheck the “Enable digital CD audio for this CD-ROM device.”

2Start “Windows Media Player.” In the menu bar, select Tools, Options, Devices tab, CD-RW Drive, and Properties.

3Select “Analog” in the “Playback” item.

Select

(This screen is an example on Windows Media Player 8.0.)

7 No data can be read from any CDs, a disc is ejected spontaneously, or the LED remains purple when a disc is inserted. (The LED does not change from lighting purple to blinking blue and then lighting blue.) (P. 2)

Remove the IDE cable from the CRW3200E drive while the 4-pin internal power cable is connected to the drive, and insert the disc once again. If no data can be read from a specific disc or a specific disc is ejected, the disc itself may be damaged or deformed.

If the LED remains purple or a disc is ejected, no matter what type of disc (e.g., an audio CD, CD-ROM or blank CD, etc.) is inserted, contact the store of purchase or your nearest Yamaha dealer (listed at the back of this manual).

32