VIS-CAM System
Table 21 | Signal table |
Electrical interface on the J-Panel:
Figure 68. J-panel electrical interface
6.3.3 (c) Ethernet Interface
100 Mb Ethernet interface. The signals are routed directly to RJ45 connector X12. The cable to the camera must be a Cat 5e or preferably a Cat 6 cable. The wire color marking on the PCB uses standard Ethernet wire colors.
6.3.3 (d) Power output |
|
Voltage: | 24VDC from power supply connected to X6 or X7 |
Current: | 2A fused |
|
|
|
70 | Appendix B: | |