Warnings and cautions when using
！WARNING
■Viewfinder lens hazard
●Do not point the eyelens toward the sun or other bright light source. There is danger of physical burns and loss of eyesight.
●Do not place the viewfinder with the lens pointed toward the sun. There is risk of burn damage to the viewfinder interior.
！CAUTION
■Power supply
The specified power supply input voltage of this camera is 12 VDC. Be sure to use the designated power supply.
■Do not disassemble or modify
The camera contains precision internal components. Do not open the cover or disturb switches and controls other than designated. There is risk of impaired performance and damage.
■Keep foreign object out of interior
Entry of water, metallic or other foreign materials can cause failure and damage.
■Select use and storage locations carefully
Avoid using or storing the equipment in the following types of locations. Impaired performance and damage can be caused.
●Extremely hot or cold locations (exceeding
45℃), such as in enclosed vehicles. ●Subject to strong vibration.
●Humid or dusty locations.
●Salt spray or corrosive gases.
●Strong electromagnetic fields (e.g., near TV or radio transmitters).
●Where exposed to rain.
■Do not cover or otherwise obstruct camera heat dissipation during operation.
！WARNING
■Viewfinder high voltage
●Do not open the viewfinder cover. There is danger of touching internal high voltage components.
！CAUTION
■When connecting and disconnecting lens, microphone and other cables, grasp the connector by the body, not the attached cable. Cables can be damaged by pulling on them.
■Note when transporting
When transporting by hand, use the carrying case. If shipping by truck or other means, pack in the carrying case, then use further cushioning and pack in a sturdy carton.
■Tripod
Use a recommended tripod and install the camera correctly.
■Cleaning
Use a photographers air blower to clear dust from the lens and filters. Wipe the case with a soft dry cloth. Do not use volatile solvents, as these may deform the materials.
■Fuse replacement
Important: Although spare fuses are provided, the fuse must be replaced only by a qualified service technician.
■In event of difficulty: Disconnect from power and contact the nearest Hitachi Denshi service agency.
4