VTR connected: Lights during recording
CCU connected: Lights at tally signal Lights to indicate low battery voltage. Immediately replace the battery when lighted.
Lights when Power switch is set to VTR Save.
lights in the following situations Gain switch other than Low Shutter switch on
Contrast (Function 1 menu) other than off
Viewfinder indications
Lighted indicators
The following lighted indicators appear above and below the viewfinder screen. T:TALLY (Tally) ‥‥‥‥‥‥‥
T | B | B:BATT (Battery) ‥‥‥‥‥‥ |
|
| |
|
| S:VTR SAVE (VTR save)‥‥‥ |
|
| !:(Setting discrepancy) ‥‥‥ |
S !
Viewfinder screen indications
Power switch on
Output switch
CAM or BAR
CAM mode
E 1/100 | 13.2V |
BAR mode (Date, time, ID)
’98.06.01 12:00
12dBF11
HITACHI
Press Check button
Check mode
E | 1/100 | 10MIN | 13.2V |
DTL |
| : 0 |
|
FLESH TONE | : OFF |
| |
MASKING | : PRESET |
| |
| ・ | : |
|
1 A | U12dB | F11 | |
|
|
|
|
Operate other than Func or
Check button
1 line display mode
E 1/100 | 13.2V |
AUTO KNEE :ON
12dBF11
Press Func button
Function mode
FUNCTION 1
CONTRAST | : OFF |
AUTO IRIS | : AVERAGE |
GAIN(MID) | : 9dB |
・ | : |
・ | : |
(Note) Check mode is produced for about 3 seconds after pressing the Check button. Then return to CAM mode.
48