Facility names and functions
17Power switch
〔VTR STDBY/SAVE、CAM ON/OFF〕 Left: (VTR:STDBY、CAM:ON)
Both camera and VTR power on and recording starts.
Center: (VTR:SAVE、CAM:ON)
Camera power on, VTR power save mode
Right: (VTR:SAVE、CAM:OFF)
Camera power off, VTR power save mode.
18Power LED
| Off | : | Camera power not supplied. |
| Lights (green): Camera power supplied, but | ||
|
|
| power switch is off. |
| Lights (red) : | Camera power switch on. | |
|
|
|
|
19 | Check | switch |
|
At the Check setting, the viewfinder indicates the status of the camera operating switches, recording elapsed time, audio level and other information.
The Zebra position provides a zebra signal for checking the video signal level on the viewfinder screen.
20White balance memory switch
PRE: | Set to this position when |
| circumstances such as time do not |
| allow adjusting the white balance. |
The white balance is set to the memory value for 3200 K.
A or B When the AUTO W/B BAL switch [12] is set to AWB, the white balance is adjusted automatically according to the Filter knob [4] setting. The adjustment is stored in the selected memory A or B.
21Output/Auto Knee switch
BARS: | Color bar signal output. |
Cam, Auto Knee Off
Pickup signal from camera not produced. Auto knee circuit inoperative.
CAM,AUTO KNEE ON
Pickup signal from camera obtained. Auto knee circuit operates.
22Gain switch
Selects video circuit gain according to scene brightness. Low, medium and high are indicated beforehand in the setting menu. The initial settings are L = 0 dB, M = 9 dB, H = 18 dB.
23
On/off for function set by menu.
8