Hitachi V-21W Function menu screen, Settings with Function menu, Operation and menu screens

Function menu screen

Settings with Function menu

Preparation menu

Settings can be changed by using the Function menu. The principal settings are as follows.

	Mode	Menu	Description
1)	CAM	Setup Card	Settings when using setup card
2)	CAM	Function 1	Memory items for each scene file
3)	CAM	Function 2	Other memory items
4)	CAM	VF Display	Viewfinder display selection
5)	BAR	Bar Function	Main menu for Bar mode
6)	BAR	GL Set	Genlock adjustment
7)	BAR	ID Set	Identification code input
8)	BAR	Time/Date	Time and date setting
9)	CAM	Special Set	Use for detailed settings
		Masking	Masking adjustment
		DTL	Detail adjustment
		Gamma	Gamma adjustment
		Knee/Clip	Knee and white clip adjustments
		White Shading	White shading adjustment
		Flare	Flare adjustment
		System	System adjustment

Operation and menu screens

Operation is from the function and direction buttons.

FUNC : Function screen on/off.

: ・Change page when cursor is at 1st line. When a sub-menu is displayed, press to return to the main menu.

When the cursor is at the 2nd line or lower, use the buttons to change the item setting or shift to a sub-menu.

At the main menu, press to display a designated sub-menu. At the Initialize line, press both buttons simultaneously to initialize the settings.

△ ▽ : Shift the cursor vertically.

To display the full menu, hold the button pressed and press the Func button.

54