Hitachi V-21W operating instructions Power supply, Voltage down display, EXT CCU/VTR Batt

Page 38

Power supply

When the CA-Z31/CA-Z32 is installed, power can be supplied as follows. Set the Power Select switch accordingly.

1.Connect the separately sold AP-60 AC adapter to the DC IN connector.

2.Connect the camera base station or VTR to the CCU/VTR connector.

3.Connect Anton-Bauer battery.

（Note）

●When a Betacam type VTR is directly connected to the camera, power is supplied from the VTR.

Caution

1.The DC IN connector can accept 10.5 to 17 VDC. However, use a designated power supply of 12 to 13 VDC. Voltage exceeding 17 VDC can cause damage.

2.In not using the equipment for an extended period of time, set the AC adapter switch to off. If a battery is connected, remove the battery.

Voltage down display

As the voltage declines, B lights in the viewfinder. The System sub-menu of the Special Set menu sets the battery type.

Alarm Set adjusts the voltage at which B lights.

Battery type	Alarm operating voltage
12.0V	1O.5V～11.6V
13.5V	11.7V～12.8V
14.4V	12.9V～14.0V

Power Select switch positions

Power supply Setting position

1EXT

2EXT

3CCU/VTR

4BATT

SYSTEM

VF DTL CONT :MENU

VIDEO(VTR) :COMP

AUDIO LEVEL :-60dB

CLOSE LIMIT :

IRIS SPEED :0

REMOTE :9600BPS

BATT TYPE :12V

ALARM SET :11.5V

27

Image 38

Contents 21W Power Sources CleaningAccessories Read InstructionsGrounding or Polarization Power-Cord ProtectionDamage Requiring Service LightningWall or Ceiling Mounting Replacement PartsSafety Check HeatWarnungen beachten Alle Anweisungen lesenDie Anweisungen aufbewahren Anweisungen befolgenNetzkabelschutz StromversorgungErdung oder Polarisierung BlitzschlagSicherheitsprüfung Beschädigung, die Wartung erfordertErsatzteile Anbringung an der Wand oder an der DeckeConserver ces instructions AccessoiresLire les instructions Tenir compte des avertissementsFoudre Mise á la terre ou polarisationProtection du cordon d’alimentation SurchargeMontage au mur ou au plafond 21. Piéces de rechange22. Vérificaton de sécurité ChaleurContents Composition including accessories Outline and features Outstanding FeaturesViewfinder display functions Suggested system configurationsExtensive operational convenience High performance viewfinder GM-9Fuse replacement Power supplyCleaning Viewfinder lens hazardFixed pattern CCD characteristic phenomenaSmear CCU/VTR Facility names and functionsBATT-CCU/VTR-EXT Batt EXTFacility names and functions CAM,AUTO Knee on PREBars Facility names and functions Facility names and functions Facility names and functions Flip-up button Lens installation ．Lens white shading with cameraLens flangeback adjustment ReferenceWhite shading adjustment Adjustment stepsFunc Camera adapter installation Mic holder attachment Microphone installationMicrophone power and sensitivity MicrophoneTripod mounting DetachingShoulder pad position Anton-Bauer battery pack Anton-Bauer battery packGM-51 5-inch viewfinder attachment GM-51 5-inch viewfinder attachment VTR connection VTR dockingVTR types and connections VTR power save VTREXT CCU/VTR Batt Power supplyVoltage down display Viewfinder adjustment Viewfinder installationPosition adjustment Visibility adjustment Screen adjustments Manual Iris adjustmentAutomatic Instant automaticMacro operation Zoom and macro operationZoom operation Optical filter selection Mmid Video gain selectionLlow HhighWhite and black balance adjustment White balance adjustmentAuto White Auto white balance error messages White balance memoryAuto black balance adjustment Auto Black Auto Black OKAuto Black NG Iris not Close TRY Again Auto black balance error messagesAuto Black NG Change to CAM TRY Again Auto BlackShutter modes Electronic shutter settingShutter mode and speed settings Lock ScanOperation with RU-Z1, RC-Z1/RC-Z11 Lock scan mode settingCC frame mode Setting steps Scene fileID DSP Date Time Audio Toneon Camera ID settingBAR Function GL SET ID SET Genlock SettingGenlock Inserting Setup cardHandling RemovalRetrieving data from card Setup card data operationSaving data to card Data load failure Formatting the cardViewfinder screen indications Lighted indicatorsViewfinder indications CAM mode Shutter speedCLS OFFAES Check mode One line indicating mode Iris ：Bars mode Status Indication of Viewfinder ScreenOperation and menu screens Settings with Function menuFunction menu screen Preparation menuCAM mode Output switch Standard menuFull menu Setup card menu detail BAR mode Output switch Function menu setting items Function 1 Scene 1 to 4 main menu corresponds to scene fileFull Auto SEL sub-menu DTL Scene 1 to 4 sub-menu corresponds to scene fileFunction 2 main menu G-B, B-R, B-G, R-8 linear matrix VF Display menuMasking Memory sub-menu Vector independent masking DTL sub-menu Gamma Memory sub-menuFlare sub-menu Knee/clip sub-menuWhite shading sub-menu System sub-menu 9600BPSID SET sub-menu Bars Function sub-menuGL SET sub-menu TIME/DATE sub-menuConnection with RU-Z2 system ROU adaptor unit Power select switch settingStudio system operation Studio system operation ROU adaptor unit Multi SystemAuto setting with RU-Z2A / RU-Z1A plug & plays RGBSystem Multi SystemService information Shield VBS Sync CHR GND Incom L2 AUDIO+ Audio AUX Video Color FrameVBS Video RLYSafety Instructions Hitachi Denshi Europa GmbH