Hitachi V-21W operating instructions Anton-Bauer battery pack

Page 32

Anton-Bauer battery pack

Anton-Bauer battery pack

Procure the separately sold battery holder to operate the camera from an Anton-Bauer battery.

1.Use 4 screws to attach the battery holder to the rear of the camera adapter.

Note:The optional buttery holder connecting cable is required. Consult Hitachi denshi service center.

2.Attach the battery pack. Insert and slide the battery pack.

3.Set the camera adapter Power Select switch to BATT.

4.To remove the battery, set the battery holder detaching lever fully downward, then slide the battery as shown by the arrow to remove it.

Note:

The intelligent/ultra basketry can also be used. The intelligent battery can automatically detect battery remaining of more than 10 %. The viewfinder indicates battery remaining as a percent. Below 10 %, the indication is voltage.

If external power is supplied after detection, the indication is intelligent battery remaining amount.

21

Image 32

Contents 21W Cleaning AccessoriesPower Sources Read InstructionsPower-Cord Protection Damage Requiring ServiceGrounding or Polarization LightningReplacement Parts Safety CheckWall or Ceiling Mounting HeatAlle Anweisungen lesen Die Anweisungen aufbewahrenWarnungen beachten Anweisungen befolgenStromversorgung Erdung oder PolarisierungNetzkabelschutz BlitzschlagBeschädigung, die Wartung erfordert ErsatzteileSicherheitsprüfung Anbringung an der Wand oder an der DeckeAccessoires Lire les instructionsConserver ces instructions Tenir compte des avertissementsMise á la terre ou polarisation Protection du cordon d’alimentationFoudre Surcharge21. Piéces de rechange 22. Vérificaton de sécuritéMontage au mur ou au plafond ChaleurContents Composition including accessories Outline and features Outstanding FeaturesSuggested system configurations Extensive operational convenienceViewfinder display functions High performance viewfinder GM-9Power supply CleaningFuse replacement Viewfinder lens hazardFixed pattern CCD characteristic phenomenaSmear Facility names and functions BATT-CCU/VTR-EXT BattCCU/VTR EXTFacility names and functions CAM,AUTO Knee on PREBars Facility names and functions Facility names and functions Facility names and functions Flip-up button Lens installation ．Lens white shading with cameraLens flangeback adjustment ReferenceWhite shading adjustment Adjustment stepsFunc Camera adapter installation Microphone installation Microphone power and sensitivityMic holder attachment MicrophoneTripod mounting DetachingShoulder pad position Anton-Bauer battery pack Anton-Bauer battery packGM-51 5-inch viewfinder attachment GM-51 5-inch viewfinder attachment VTR connection VTR dockingVTR types and connections VTR power save VTREXT CCU/VTR Batt Power supplyVoltage down display Viewfinder adjustment Viewfinder installationPosition adjustment Visibility adjustment Screen adjustments Iris adjustment AutomaticManual Instant automaticMacro operation Zoom and macro operationZoom operation Optical filter selection Video gain selection LlowMmid HhighWhite and black balance adjustment White balance adjustmentAuto White Auto white balance error messages White balance memoryAuto black balance adjustment Auto Black Auto Black OKAuto black balance error messages Auto Black NG Change to CAM TRY AgainAuto Black NG Iris not Close TRY Again Auto BlackElectronic shutter setting Shutter mode and speed settingsShutter modes Lock ScanOperation with RU-Z1, RC-Z1/RC-Z11 Lock scan mode settingCC frame mode Setting steps Scene fileID DSP Date Time Audio Toneon Camera ID settingBAR Function GL SET ID SET Genlock SettingGenlock Setup card HandlingInserting RemovalRetrieving data from card Setup card data operationSaving data to card Data load failure Formatting the cardViewfinder screen indications Lighted indicatorsViewfinder indications CAM mode Shutter speedCLS OFFAES Check mode One line indicating mode Iris ：Bars mode Status Indication of Viewfinder ScreenSettings with Function menu Function menu screenOperation and menu screens Preparation menuCAM mode Output switch Standard menuFull menu Setup card menu detail BAR mode Output switch Function menu setting items Function 1 Scene 1 to 4 main menu corresponds to scene fileFull Auto SEL sub-menu DTL Scene 1 to 4 sub-menu corresponds to scene fileFunction 2 main menu G-B, B-R, B-G, R-8 linear matrix VF Display menuMasking Memory sub-menu Vector independent masking DTL sub-menu Gamma Memory sub-menuFlare sub-menu Knee/clip sub-menuWhite shading sub-menu System sub-menu 9600BPSBars Function sub-menu GL SET sub-menuID SET sub-menu TIME/DATE sub-menuConnection with RU-Z2 system ROU adaptor unit Power select switch settingStudio system operation Studio system operation ROU adaptor unit Multi SystemAuto setting with RU-Z2A / RU-Z1A plug & plays RGBSystem Multi SystemService information Shield Color Frame VBS VideoVBS Sync CHR GND Incom L2 AUDIO+ Audio AUX Video RLYSafety Instructions Hitachi Denshi Europa GmbH