Hitachi V-21W operating instructions Genlock, Setting

Page 55

Genlock

The camera can be operated from external synchronization. The mode is automatically switched from internal to external sync when an external sync signal is supplied.

Setting

1.Set the Output/Auto Knee switch to Bar and press the Function button to display the Bar Function page in the viewfinder.

2. Press the

▽

button to position the cursor to GL SET, then press the

button to show the GL SET page.

BAR FUNCTION

GL SET	:->

ID SET	:->
TIME/DATE	:->
ID DSP	:ON
DATE	:Y.M.D
TIME	:ON

AUDIO TONE:ON

GL SET
H.PHASE	:0
SC COARSE	:0ﾟ
SC FINE	:0

3.Adjust the horizontal phase with H PHASE and the subcarrier phase with SC COARSE and SC FINE.

Connection example

Video input connector

Sync output connector

Special effect generator

＜Note＞

Genlock

When two or more cameras and other equipment, such as a special effect amplifier, are connected into a system, the horizontal sync and subcarrier phase of all equipment must be aligned. Genlock applies a reference signal to the cameras to synchronize operation.

44

Image 55

Contents 21W Read Instructions CleaningAccessories Power SourcesLightning Power-Cord ProtectionDamage Requiring Service Grounding or PolarizationHeat Replacement PartsSafety Check Wall or Ceiling MountingAnweisungen befolgen Alle Anweisungen lesenDie Anweisungen aufbewahren Warnungen beachtenBlitzschlag StromversorgungErdung oder Polarisierung NetzkabelschutzAnbringung an der Wand oder an der Decke Beschädigung, die Wartung erfordertErsatzteile SicherheitsprüfungTenir compte des avertissements AccessoiresLire les instructions Conserver ces instructionsSurcharge Mise á la terre ou polarisationProtection du cordon d’alimentation FoudreChaleur 21. Piéces de rechange22. Vérificaton de sécurité Montage au mur ou au plafondContents Composition including accessories Outstanding Features Outline and featuresHigh performance viewfinder GM-9 Suggested system configurationsExtensive operational convenience Viewfinder display functionsViewfinder lens hazard Power supplyCleaning Fuse replacementSmear CCD characteristic phenomenaFixed pattern EXT Facility names and functionsBATT-CCU/VTR-EXT Batt CCU/VTRFacility names and functions Bars PRECAM,AUTO Knee on Facility names and functions Facility names and functions Facility names and functions Flip-up button ．Lens white shading with camera Lens installationReference Lens flangeback adjustmentAdjustment steps White shading adjustmentFunc Camera adapter installation Microphone Microphone installationMicrophone power and sensitivity Mic holder attachmentDetaching Tripod mountingShoulder pad position Anton-Bauer battery pack Anton-Bauer battery packGM-51 5-inch viewfinder attachment GM-51 5-inch viewfinder attachment VTR docking VTR connectionVTR types and connections VTR VTR power saveVoltage down display Power supplyEXT CCU/VTR Batt Viewfinder installation Viewfinder adjustmentPosition adjustment Visibility adjustment Screen adjustments Instant automatic Iris adjustmentAutomatic ManualZoom operation Zoom and macro operationMacro operation Optical filter selection Hhigh Video gain selectionLlow MmidWhite balance adjustment White and black balance adjustmentAuto White White balance memory Auto white balance error messagesAuto Black Auto Black OK Auto black balance adjustmentAuto Black Auto black balance error messagesAuto Black NG Change to CAM TRY Again Auto Black NG Iris not Close TRY AgainLock Scan Electronic shutter settingShutter mode and speed settings Shutter modesCC frame mode Lock scan mode settingOperation with RU-Z1, RC-Z1/RC-Z11 Scene file Setting stepsBAR Function GL SET ID SET Camera ID settingID DSP Date Time Audio Toneon Genlock SettingGenlock Removal Setup cardHandling InsertingSaving data to card Setup card data operationRetrieving data from card Formatting the card Data load failureViewfinder indications Lighted indicatorsViewfinder screen indications Shutter speed CAM modeAES OFFCLS Check mode Iris ： One line indicating modeStatus Indication of Viewfinder Screen Bars modePreparation menu Settings with Function menuFunction menu screen Operation and menu screensStandard menu CAM mode Output switchFull menu Setup card menu detail BAR mode Output switch Function 1 Scene 1 to 4 main menu corresponds to scene file Function menu setting itemsFunction 2 main menu DTL Scene 1 to 4 sub-menu corresponds to scene fileFull Auto SEL sub-menu Masking Memory sub-menu Vector independent masking VF Display menuG-B, B-R, B-G, R-8 linear matrix Gamma Memory sub-menu DTL sub-menuWhite shading sub-menu Knee/clip sub-menuFlare sub-menu 9600BPS System sub-menuTIME/DATE sub-menu Bars Function sub-menuGL SET sub-menu ID SET sub-menuStudio system operation ROU adaptor unit Power select switch settingConnection with RU-Z2 system Studio system operation Multi System ROU adaptor unitRGB Auto setting with RU-Z2A / RU-Z1A plug & playsMulti System SystemService information Shield RLY Color FrameVBS Video VBS Sync CHR GND Incom L2 AUDIO+ Audio AUX VideoSafety Instructions Hitachi Denshi Europa GmbH