EverFocus user manual EPTZ900/500 Quick Operation Guide Work with EKB500

Page 12

1.5. EPTZ900/500 Quick Operation Guide (Work with EKB500)

EPTZ900/500 and EKB500 (Keyboard) can work together by using factory default setting. You just need to connect cables by following the steps:

1.Connect the RS485 cable to EPTZ900/500 and a Keyboard (EKB500).

2.Connect a video cable from EPTZ900/500 to a monitor.

3.Connect the power to the EPTZ900/500 and a Keyboard (EKB500) .

After the speed dome finishes the self-test mode, you can start to operate the speed dome via the keyboard.

To operate the EPTZ900/500:

				UP
IRIS	Focus	Zoom	Zoom OUT	Zoom IN
+	F.	In
		LEFT		RIGHT
-	N.	Out
				DOWN

1.Shift the Joystick up/down or right/left to view from camera.

2.Turn the top of the Joystick to zoom in/out.

3.Press Zoom In/Out, Focus F. /N. and IRIS +/- function keys to operate the EPTZ900/500.

1-11

Image 12

Contents EPTZ900/500 Table of Contents EPTZ900/500 Function Setup and Operation Structure of the Setup Menu Camera Setup MenuEPTZ900/500 Overview IntroductionPage EPTZ900 EPTZ500 CE FCC Feature Profile of EPTZ900/500 EPTZ500Relay EPTZ900 BaseboardRelay EPTZ500 Baseboard EPTZ900/500 Control BoardEPTZ900/500 EPTZ900/500 Quick Operation Guide Work with EKB500 Cable Needed Power Cable Packing ListVideo Cable ID1 Page Address EVF 1 PELCO-D PELCO-P TYPE-A OFF CAM-0 CAM-1 Rack and Speed Dome Installation Installation Requirements Relay Glove Turn on the power, and start to operate the EPTZ900 Cut the ceiling Page Glove Separately Sold Accessories Pole mount EPTZ900/500 Camera Setup Menu Structure of the Setup MenuCamera Setup Menu Page Page Page EPTZ900/500 Function Setup and Operation Manual Control ModeTour Mode ¾ Set an alarm link ¾ Delete an alarm linkEPTZ900 base board Pin # FunctionAppendix B Protocol Function CMD2 IDH IDL DATA1 Char Coor=0-19 Char=ASCII code EverFocus Electronics Corp