EverFocus EPTZ900 user manual CMD2 IDH IDL DATA1

------------------------------	+ -----	------	-----	-----	-------	-----	-----	+	---------------------------------
Set Single Point Alarm Linkage FA		7A-7D	.	.	pp	.	cs	pp=1-192 (position)
Clr Single Point Alarm Linkage FA		7E-81	.	.	AA	.	cs
Cruise Alarm Linkage Set	FA	82-85	.	.	group	.	cs	group=1-16
Cruise Alarm Linkage Cancel	FA	86-89	.	.	AA	.	cs
------------------------------	+ -----	------	-----	-----	-------	-----	-----	+	---------------------------------
set preset position parameter FA		A0	.	.	pp	.	cs	pp=1-192 (position)
speed to preset position	FA	A1	.	.	speed	.	cs	speed=1-EFh
Dwell time at preset position FA		A2	.	.	dwell	.	cs	dwell=1-EFh (seconds)
Set PresetPosition Param Close FA		A3	.	.	AA	.	cs
------------------------------	+ -----	------	-----	-----	-------	-----	-----	+	---------------------------------
Home Position Set	FA	A4	.	.	AA	.	cs
Wait time at Home Position	FA	A5	.	.	WaitT	.	cs	WaitT=0-EFh (minutes)
Enable Home position On/Close FA		A6	.	.	on-off	.	cs	on-off=0/1		(0=off, 1=on)
------------------------------	+ -----	------	-----	-----	-------	-----	-----	+	---------------------------------
Clear Preset Position	FA	A7	.	.	pp	.	cs	pp=1-192 (position)
==============================+====== ====== ===== =====					======= ===== =====+=================================
Speed Dome Setup Menu	FA	90	.	.	operate	.	cs	operate=01		Enter menu mode
									=02	Exit menu mode
									=03	menu cursor up
									=04	menu cursor down
									=05	menu cursor left
									=06	menu cursor right
									=07	select option
									=08	confirm

==============================================================================================================

2-2. Part-II ( Enhance part )

================================================================================================================

		(B1)	(B2)	(B3)	(B4)	(B5)	(B6)	(B7)	(B8)
FUNCTION	CMD1		CMD2	IDH	IDL	DATA1	KB-ID	DATA2	CSUM DESCRIPTION
------------------------------	+	------	-----	----- -----		------ -----		-----	-----+		---------------------------
enhance move	FC		OP	.	.	x-spd	.	y-spd	cs	OP: (0-3)
											bit0: (0=right, 1=left)
											bit1: (0=up, 1=down)
										x-spd=0-EFh
										y-spd=0-EFh

4-39