EverFocus EPTZ900 user manual Cut the ceiling

Page 25

2.4.3. EPTZ500 Dome Camera Installation

1.Take off the housing from the packing, and take off he PCB board (4 bolts on it) inside the housing.

2.Cut the ceiling against the housing’s shape with a saw.

3.Thread the cable through the screw and the hole on the top of the housing, and tighten up the screw to fix the cable

4.Place the housing into the hole that you just made. Fix the housing on the ceiling with two clips, adjust the screws of clips to make the housing perfectly fit to the ceiling.

5.Connect the cable connectors to the nodes on the base board, and then fix the base board in the housing by screwing 4 bolts on it.

Cut the ceiling

RELAY

Video +

Video -

RS485 +

RS485 -

AC24

AC24

JP5

2-24

Image 25

Contents EPTZ900/500 Table of Contents Structure of the Setup Menu Camera Setup Menu EPTZ900/500 Function Setup and OperationIntroduction EPTZ900/500 OverviewPage EPTZ900 EPTZ500 CE FCC EPTZ500 Feature Profile of EPTZ900/500EPTZ900 Baseboard RelayEPTZ500 Baseboard EPTZ900/500 Control Board RelayEPTZ900/500 EPTZ900/500 Quick Operation Guide Work with EKB500 Packing List Cable Needed Power CableVideo Cable ID1 Page Address EVF 1 PELCO-D PELCO-P TYPE-A OFF CAM-0 CAM-1 Rack and Speed Dome Installation Installation Requirements Relay Glove Turn on the power, and start to operate the EPTZ900 Cut the ceiling Page Glove Separately Sold Accessories Pole mount Structure of the Setup Menu EPTZ900/500 Camera Setup MenuCamera Setup Menu Page Page Page Manual Control Mode EPTZ900/500 Function Setup and OperationTour Mode ¾ Delete an alarm link ¾ Set an alarm linkPin # Function EPTZ900 base boardAppendix B Protocol Function CMD2 IDH IDL DATA1 Char Coor=0-19 Char=ASCII code EverFocus Electronics Corp