Nikon WP-CP3 user manual Iii

Page 5

Cautions

To ensure continued enjoyment of your Nikon product, observe the following precautions when storing or using the device.

Preventing Leakage

WATER INSIDE THE CASE COULD NOT ONLY EXPOSE THE CAMERA TO IRREPARABLE DAMAGE BUT ALSO RESULT IN FIRE, ELECTRIC SHOCK, OR EXPOSURE TO POISONOUS GASES. THE ENTRY OF WATER INTO THE CASE CAN BE PREVENTED BY OBSERVING THE FOLLOWING PRECAUTIONS:

Before using the WP-CP3 in or near water, test for leaks as described on pages 6–7 and 12 of this manual.

•Before sealing the case, examine the O-ring, watertight channel, and any parts of the case that are in contact with the O-ring carefully to ensure that they are free of dirt, hair, lint, dust, sand, and other foreign objects. Make sure that the O-ring is not twisted or out of position.

•The O-ring requires periodic replacement. Replace the O-ring immediately if it is dam- aged, cracked, warped, or has lost elasticity. O-rings should be replaced at least once a year; do not use a worn O-ring or a type of O-ring or O-ring grease not designated for use in this product. Do not use NIKONOS O-ring lubricant (grease).

•Be careful not to damage the O-ring when removing it from the case. Do not use metal objects or objects with sharp points when removing the O-ring.

•Do not use force when removing or positioning the O-ring. Excessive force may per- manently stretch the ring, causing the case to leak.

•To prevent wear, use only COOLPIX O-ring grease designated for use with this prod- uct. Do not use NIKONOS O-ring lubricant (grease) or other types of O-ring grease.

•Do not open the waterproof case in areas exposed to spray, high winds, dust, or sand.

•Do not drop the case, place under heavy objects, or subject to excessive force. Failure to observe this precaution could cause the case to warp, resulting in leakage.

•In the event of leakage, stop use immediately, dry the camera and the interior of the case, and take the camera and case to a Nikon-authorized service representative.

Shock and Vibration

The waterproof case is not designed to protect the camera from blows or vibration. Do not drop the case, strike it against hard objects, throw it into the water, jump into the water holding the case, or leave the case in an area subject to extreme vibration. Failure to observe these precautions could result in damage to the camera.

Maximum Depth

The WP-CP3 is waterproof to 40 m (130´). At greater depths, the case could leak, break, or change shape, resulting in damage to the camera.

iii

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Waterproof Case User’s Manual WP-CP3Turn camera off immediately in the event of malfunction For Your SafetyDo not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible CamerasIntroduction Package ContentsAttaching the Strap Parts of the WP-CP3Introduction Overview Follow these steps when using the waterproof caseCaring for the O-ring Storage Turn the camera on Adjust settings Take picturesCheck for Leaks Check for Leaks Insert the Camera Select Underwater modeReady the Camera BatteriesTurn the camera off Release the buckle Insert the CameraLatch forward and open the buckle Open the caseReplacing the Desiccant Insert DesiccantPerform a Final Check Close the Case Check for Leaks Again Turn the Camera On Adjust SettingsTake Pictures Don’t Block the Shot Take PicturesUse the Monitor Era is in the case. Use the monitor to frameWash the case in fresh water Clean the CaseDrying the Case Removing the CameraDo Not Exposure to Sunlight or Heat Cleaning the Interior of the CaseCaring for the O-ring MaintenanceDo Not Use Force or Sharp Objects Replacing the O-ringGrease the O-ring CleaningTechnical Notes Optional AccessoriesStorage SpecificationsBenutzerhandbuch Warnhinweise SicherheitshinweiseVerwenden Sie das Produkt nur bis maxi- mal 40 m Wassertiefe Vermeiden einer Undichtigkeit AchtungTemperatur Einsetzen der Kamera in das Gehäuse InhaltsverzeichnisImmer auf dem neuesten Stand HinweiseDer Packungsinhalt EinführungBefestigen des Trageriemens Das Unterwassergehäuse WP-CP3 in der ÜbersichtLöschtaste Verwenden des WP-CP3 ÜbersichtSchritt 4 Fotografieren Verriegeln Sie das Gehäuse Schritt 1 Überprüfen der DichtigkeitSchließen Sie das Gehäuse Prüfen Sie, ob Wasser in das Gehäuse einge- drungen ist Prüfen Sie auf DichtigkeitTesten Sie die Bedienelemente Vorbereiten der Kamera Schritt 2 Einsetzen der Kamera in das GehäuseWählen Sie den Unter Wasser Modus Entfernen Sie den Trageriemen der KameraSetzen Sie die Kamera ein Einsetzen der KameraÖffnen Sie das Gehäuse Letzte Kontrolle Einlegen des TrockenmittelsKlappen Sie das Gehäuse zu Schließen des GehäusesSchritt 3 Erneutes Überprüfen der Dichtigkeit Einstellen der Kamera Schritt 4 FotografierenEinschalten der Kamera Halten Sie die Kamera aufnahmebereit FotografierenWählen Sie den Bildausschnitt Stellen Sie scharf und lösen Sie ausSpülen Sie das Unterwassergehäuse unter klarem Wasser ab Schritt 5 Reinigen des UnterwassergehäusesWischen Sie das Gehäuse trocken Nehmen Sie die Kamera herausReinigen der Innenseite des Gehäuses Lassen Sie das Gehäuse an einem geeigneten Ort trocknenPflege des O-Rings PflegeanleitungNehmen Sie den O-Ring heraus Riss Kontrollieren Sie den O-RingÜberprüfen Sie die Dichtung Fetten Sie den O-RingSetzen Sie den O-Ring ein Aufbewahrung Technische HinweiseTechnische Daten Optionales ZubehörManuel de lutilisateur ’utilisez pas votre matériel en présence de gaz inflammable Pour votre sécuritéMaintenez le caisson étanche Eviter l’entrée d’eau Température Table des matières Formation permanente AvertissementsContenu de la boîte Fixation de la dragonne Descriptif du WP-CP3Introduction Nière vérification Son Présentation généraleEffectuer une der Entretien du joint torique Rangement Étape 3 Vérifier à nouveau l’étanchéité du caissonImmerger le caisson Étape 1 Vérifier l’étanchéité du caissonFermer le caisson Vérifier que l’eau n’est pas rentrée dans le caisson Vérifier l’étanchéitéAccus/ piles Préparer l’appareil photoOuverture du caisson Introduire l’appareil photoPlacer l’absorbeur d’humidité Remplacement de l’absorbeur d’humiditéEffectuer une dernière vérification Le joint torique est-il craquelé ou abîmé?Fermer le caisson Étape 3 Vérifier à nouveau l’étanchéité du caisson Régler les paramètres Étape 4 PhotographierMettre l’appareil sous tension ’entravez pas la prise de vue PhotographierUtiliser le moniteur Mettre au point et déclencherNettoyer le caisson dans de l’eau douce Étape 5 Nettoyer le caissonEssuyage du caisson Retrait de l’appareil photoNettoyage de l’intérieur du caisson Entretien du joint torique Remplacement du joint toriqueRetirer le joint torique Inspecter le joint toriqueNettoyage Graisser le joint toriqueRemarques techniques Accessoires optionnelsRangement Caractéristiques사용설명서의 일부 또는 전부를 무단으로 전재하는 것은 엄 격히 금지합니다

WP-CP3 specifications

The Nikon WP-CP3 is a versatile waterproof case designed to protect select Nikon cameras, allowing photography enthusiasts to explore underwater environments without compromising their equipment. With its robust construction and intuitive design, the WP-CP3 enables users to capture stunning images and videos in challenging conditions.

One of the most notable features of the WP-CP3 is its impressive waterproof depth rating. The case can withstand depths of up to 30 meters, making it suitable for a wide range of water activities, from snorkeling to scuba diving. This depth capability ensures that photographers can confidently venture into aquatic environments, knowing their camera is protected from water damage.

The WP-CP3 is constructed from durable polycarbonate material, providing both strength and lightweight portability. Its transparent design allows for easy framing and composition of shots underwater while maintaining visibility of the camera controls. This is particularly important for photographers who require precise adjustments in lighting and focus even when submerged.

In terms of usability, the WP-CP3 incorporates ergonomically designed controls, enabling photographers to access essential functions without removing the camera from the case. Buttons for shutter release, zoom control, and mode selection are intuitively placed for easy operation. This thoughtful design ensures that users can quickly capture moments without fumbling, even in demanding conditions.

The WP-CP3 also features an anti-fog system, which helps to minimize condensation and maintain clarity in underwater shots. This technology is valuable for photographers who frequently transition between different temperatures or move from above water to below, ensuring a seamless shooting experience.

Compatibility is another strong point of the WP-CP3. Designed for specific Nikon models, it seamlessly integrates with select cameras, allowing full functionality and performance without hinderance. This tailored fit means that users do not have to sacrifice quality or functionality when utilizing the case.

In summary, the Nikon WP-CP3 is a reliable and robust waterproof case that empowers photographers to capture breathtaking underwater imagery. With its impressive depth rating, durable construction, intuitive controls, and anti-fog technology, the WP-CP3 stands out as an essential accessory for anyone looking to push the boundaries of their photography in aquatic environments. Whether exploring coral reefs or capturing the beauty of underwater wildlife, the WP-CP3 ensures that photographers can do so with confidence and ease.
Top Page Image Contents