Yamaha RX-SL100RDS Speaker connections, Cable tags, Return the tab to secure the wire, 10 mm 3/8

Page 11

Speaker connections

Be sure to connect the left channel (L), right channel (R), “+” (colored) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

•If you will use 6 ohm speakers, be sure to set this unit’s speaker impedance setting to 6 ohms before using (see “IMPEDANCE SELECTOR switch” on page 10).

•Before connecting the speakers, make sure that the power of this unit is off.

•Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/or speakers.

•Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (colored) terminals on this unit and your speaker. Connect the plain cable to the “–” (black) terminals.

10 mm (3/8")

1

 

 

 

2

1Remove approximately 10 mm (3/8") of insulation from each of the speaker cables.

2Twist the exposed wires of the cable together to prevent short circuits.

3Press and hold the tab to insert the speaker wire.

SPEAKER SETUP

4Return the tab to secure the wire.

Colored: positive (+)

Black: negative (–)

■Cable tags

6 pairs of different colored cable tags are provided with this product. The colors of the cable tags and their respective speaker cables are as follows:

•Red: Front right speaker cable

•White: Front left speaker cable

•Green: Center speaker cable

•Gray: Surround right speaker cable

•Blue: Surround left speaker cable

•Brown: Surround back speaker cable

To make it easier to distinguish the various speaker cables, attach the colored tags to the appropriate speaker cables as shown below.

PREPARATION

English

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RX-SL100RDS Special Instructions for U.K. Model For U.K. customersContents Features Please check that you received all of the following parts Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsRemote control AMP mode SET Menu Using the remote controlHandling the remote control Volume +Front panel display Speaker placement Speaker Setup10 mm 3/8 Return the tab to secure the wireSpeaker connections Cable tagsImpedance Selector switch Impedance Selector switchSurround Back terminals Speaker connectionsFront terminals Surround terminalsConnecting AV components Before connecting componentsConnecting other components Connecting a TVOptical out DVD player DTV or Digital audio connectionsVideo 2 jacks on the front panel Included White Black Connecting the antennasConnecting the AM loop antenna Frequency Step Asia and General Models onlyFront panel Remote control Connecting the powerTurning on the power Connecting the AC powerSpeaker Set Up Basic SetupUsing Basic setup Press k/n repeatedly to select Yes or No, then press Enter Speaker LevelPress k/n repeatedly to select Room Size, then press Enter EnterMemory back-up Basic operations Press STANDBY/ON to turn on the powerAdjust the volume to the desired output level PlaybackSelecting sound field programs Remote control operationTo listen with headphones Silent Cinema Press Mute on the remote controlListening at night Press DSP, then rotate VOLUME/SELECT within 5 secondsPress Night on the remote control Front panel operationLights TuningAutomatic and manual tuning Automatic tuningDisappears Manual tuningFM appears on the front panel display Presetting stationsAutomatically presetting FM stations Hold down VOLUME/SELECT for more than 6 secondsTune into a station Selecting preset stationsManually presetting stations See page 22 for tuning instructionsReceiving RDS stations Press u Preset d to select the desired program type Changing the RDS modeTo cancel this function Press PTY Seek Mode to set this unit in the PTY Seek modeEON function Then To change the Standby Scart settingRecording For music Sound Field Program DescriptionsFor Hi-Fi DSP programs Type ButtonFor movie For CINEMA-DSP programsFor audio VideoAdvanced Operations Using the sleep timerSetting the sleep timer Canceling the sleep timerOperation Advanced Enjoying 2-channel softwarePRO Logic PRO Logic EnhancedPress k/n repeatedly to select Input Mode, then press h Virtual Cinema DSPInput Mode Displaying information about the input Source Press AMP to select the AMP modePress l / h to adjust the speaker output level Control Using the test tonePress Test on the remote Input menu SET MenuBasic menu Sound menuPress k/n repeatedly to select a menu, then press h Changing parameter settingsPress AMP, then press SET Menu to enter HP Tone Control Headphone tone Sound menuCenter SP. GEQ Center speaker graphic Equalizer SP Tone Control Speaker tone controlSpeaker Set Speaker set Dynamic Range Dynamic range SP Distance Speaker distanceLFE Level Low-frequency effect level Choices VCR, VIDEO1, DTV/CBL, DVD/CD Input menuInput Assign Input assignment Optical InputOption menu Input Mode Input modeTuner Freq/Step Tuner frequency step Display Dimmer Display dimmerMemory Guard Memory guard Audio Mute MuteControlling other components Remote Control FeaturesControl area Controlling this unitHold down Code SET while doing steps 2 Setting manufacturer codesDefault codes Setting a codeENT Controlling other componentsElements of a sound field What is a sound fieldEditing Sound Field Parameters For 6ch Stereo Delay DelayDimension Dimension DSP Level DSP levelGeneral TroubleshootingOne side can be Sound suddenlyGoes off Only the speaker onStandby mode Or DTS indicator onVolume level Switches toTuner Function properly Remote controlDoes not work or Glossary Sampling frequency and number Quantized bits Virtual Cinema DSPPCM Linear PCM Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents