Yamaha RX-SL100RDS owner manual Changing the RDS mode, PTY Seek function, To cancel this function

Page 29

Changing the RDS mode

The four modes are available in this unit for displaying RDS data. The PS, PTY, RT and/or CT mode indicators that correspond to the RDS data services offered by the station light up on the front panel display. Press FREQ/ RDS on the remote repeatedly to change the display mode among the RDS data offered by the transmitting station in the order shown below.

FREQ/RDS

PS

 

s

PTY

RT

CT

Frequency

display mode

Notes

•Do not press FREQ/RDS until one or more RDS mode indicators light up on the front panel display. You cannot change the mode if you press the button prior to this. This is because this unit has not finished receiving all of the RDS data from the station.

•RDS data not offered by the station cannot be selected.

•This unit cannot utilize the RDS data source if the signal received is not strong enough. In particular, the RT mode requires a large amount of data, so it is possible that the RT mode may not be displayed even if other RDS modes (PS, PTY, etc.) are displayed.

•RDS data may not be received under poor reception conditions. In such cases, press TUNING MODE so that the “AUTO” indicator disappears from the front panel display. Although this will change the reception mode to manual, RDS data may be displayed when you change the display to RDS mode.

•If the signal strength is weakened by external interference during the reception of an RDS station, the RDS data service may be cut off suddenly and “...WAIT” will appear on the front panel display.

TUNING

PTY SEEK function

If you select the desired program type, this unit automatically searches all preset RDS stations that are broadcasting a program of the required type.

1Press PTY SEEK MODE to set this unit in the PTY SEEK mode.

The program type of the station being received or “NEWS” flashes on the front panel display.

MODE PTY SEEK START

e f

Flashes

2Press u PRESET d to select the desired program type.

The selected program type appears on the front panel display.

d PRESET u

p a

3Press PTY SEEK START to begin searching all preset RDS stations.

The selected program type flashes and the “PTY HOLD” indicator lights up on the front panel display while searching for stations.

MODE PTY SEEK START

PTY HOLD

e f

Lights up

•The unit stops searching when it finds a station broadcasting the selected type of program.

•If the found station is not the one you desire one, press PTY SEEK START again. This unit resumes searching for another station broadcasting the same type of program.

To cancel this function

Press PTY SEEK MODE twice.

OPERATION

BASIC

 

 

English

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents RX-SL100RDS Special Instructions for U.K. Model For U.K. customersContents Features Installing batteries in the remote control Supplied accessoriesGetting Started Please check that you received all of the following partsFront panel Controls and FunctionsRemote control AMP mode Handling the remote control Using the remote controlVolume + SET MenuFront panel display Speaker placement Speaker SetupSpeaker connections Return the tab to secure the wireCable tags 10 mm 3/8Impedance Selector switch Impedance Selector switchFront terminals Speaker connectionsSurround terminals Surround Back terminalsConnecting other components Before connecting componentsConnecting a TV Connecting AV componentsOptical out DVD player DTV or Digital audio connectionsVideo 2 jacks on the front panel Connecting the AM loop antenna Connecting the antennasFrequency Step Asia and General Models only Included White BlackTurning on the power Connecting the powerConnecting the AC power Front panel Remote controlSpeaker Set Up Basic SetupUsing Basic setup Press k/n repeatedly to select Room Size, then press Enter Speaker LevelEnter Press k/n repeatedly to select Yes or No, then press EnterMemory back-up Adjust the volume to the desired output level Press STANDBY/ON to turn on the powerPlayback Basic operationsTo listen with headphones Silent Cinema Remote control operationPress Mute on the remote control Selecting sound field programsPress Night on the remote control Press DSP, then rotate VOLUME/SELECT within 5 secondsFront panel operation Listening at nightAutomatic and manual tuning TuningAutomatic tuning LightsDisappears Manual tuningAutomatically presetting FM stations Presetting stationsHold down VOLUME/SELECT for more than 6 seconds FM appears on the front panel displayManually presetting stations Selecting preset stationsSee page 22 for tuning instructions Tune into a stationReceiving RDS stations To cancel this function Changing the RDS modePress PTY Seek Mode to set this unit in the PTY Seek mode Press u Preset d to select the desired program typeEON function Then To change the Standby Scart settingRecording For Hi-Fi DSP programs Sound Field Program DescriptionsType Button For musicFor audio For CINEMA-DSP programsVideo For movieSetting the sleep timer Using the sleep timerCanceling the sleep timer Advanced OperationsPRO Logic Enjoying 2-channel softwarePRO Logic Enhanced Operation AdvancedPress k/n repeatedly to select Input Mode, then press h Virtual Cinema DSPInput Mode Displaying information about the input Source Press AMP to select the AMP modePress l / h to adjust the speaker output level Control Using the test tonePress Test on the remote Basic menu SET MenuSound menu Input menuPress k/n repeatedly to select a menu, then press h Changing parameter settingsPress AMP, then press SET Menu to enter Center SP. GEQ Center speaker graphic Equalizer Sound menuSP Tone Control Speaker tone control HP Tone Control Headphone toneSpeaker Set Speaker set Dynamic Range Dynamic range SP Distance Speaker distanceLFE Level Low-frequency effect level Input Assign Input assignment Input menuOptical Input Choices VCR, VIDEO1, DTV/CBL, DVD/CDOption menu Input Mode Input modeMemory Guard Memory guard Display Dimmer Display dimmerAudio Mute Mute Tuner Freq/Step Tuner frequency stepControl area Remote Control FeaturesControlling this unit Controlling other componentsDefault codes Setting manufacturer codesSetting a code Hold down Code SET while doing steps 2ENT Controlling other componentsElements of a sound field What is a sound fieldEditing Sound Field Parameters Dimension Dimension Delay DelayDSP Level DSP level For 6ch StereoGeneral TroubleshootingGoes off Sound suddenlyOnly the speaker on One side can beVolume level Or DTS indicator onSwitches to Standby modeTuner Function properly Remote controlDoes not work or Glossary Sampling frequency and number Quantized bits Virtual Cinema DSPPCM Linear PCM Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents