Yamaha RX-SL100RDS Connections, Before connecting components, Connecting other components

Page 14

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between components are complete.

•Make sure that all connections are made correctly - that is to say, L (left) to L, R (right) to R, “+” to “+” and “–”

to “–”. Some components require different connection methods and have different jack names. Refer to the operating instructions for each component you wish to connect to this unit.

•After you have completed all connections, check them again to make sure they are correct.

•The jack names correspond to the names on the input selector.

Connecting other components

■Connecting a TV

Connect one end of the SCART cable to the TV/IN OUT connector on this unit and the other end to the SCART connector on your TV.

■Connecting AV components

Connect one end of the SCART cable to the EXT. IN/OUT connector on this unit and the other end to the SCART connector on your AV component. You can also daisy chain several SCART components together as shown in “Digital audio connections” (page 13).

AV component

(DVD player, cable tuner, etc.)

TV

AM ANT GND

FM ANT

EXT. IN/OUT

TV IN/OUT

TUNER

75Ω UNBAL

 

 

 

 

 

OPTICAL

COAXIAL

 

DIGITAL

 

 

 

INPUT

 

 

OUTPUT

1DVD/CD

2/CBLDTV

3VIDEO 1

SUBWOOFER

SPEAKERS

FRONT

CENTER

SURROUND

SURR BACK

R

L

 

R

L

 

+

 

 

 

 

+

–

 

 

 

 

–

MAINS

Note

Use a SCART cable to make the above connections. The SCART cable, or “Euro AV cable”, supports IN/OUT signal transmission, providing you with the best possible picture and sound.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RX-SL100RDS For U.K. customers Special Instructions for U.K. ModelContents Features Getting Started Supplied accessoriesInstalling batteries in the remote control Please check that you received all of the following partsControls and Functions Front panelRemote control AMP mode Volume + Using the remote controlHandling the remote control SET MenuFront panel display Speaker Setup Speaker placementCable tags Return the tab to secure the wireSpeaker connections 10 mm 3/8Impedance Selector switch Impedance Selector switchSurround terminals Speaker connectionsFront terminals Surround Back terminalsConnecting a TV Before connecting componentsConnecting other components Connecting AV componentsOptical out DVD player DTV or Digital audio connectionsVideo 2 jacks on the front panel Frequency Step Asia and General Models only Connecting the antennasConnecting the AM loop antenna Included White BlackConnecting the AC power Connecting the powerTurning on the power Front panel Remote controlSpeaker Set Up Basic SetupUsing Basic setup Enter Speaker LevelPress k/n repeatedly to select Room Size, then press Enter Press k/n repeatedly to select Yes or No, then press EnterMemory back-up Playback Press STANDBY/ON to turn on the powerAdjust the volume to the desired output level Basic operationsPress Mute on the remote control Remote control operationTo listen with headphones Silent Cinema Selecting sound field programsFront panel operation Press DSP, then rotate VOLUME/SELECT within 5 secondsPress Night on the remote control Listening at nightAutomatic tuning TuningAutomatic and manual tuning LightsManual tuning DisappearsHold down VOLUME/SELECT for more than 6 seconds Presetting stationsAutomatically presetting FM stations FM appears on the front panel displaySee page 22 for tuning instructions Selecting preset stationsManually presetting stations Tune into a stationReceiving RDS stations Press PTY Seek Mode to set this unit in the PTY Seek mode Changing the RDS modeTo cancel this function Press u Preset d to select the desired program typeEON function Then To change the Standby Scart settingRecording Type Button Sound Field Program DescriptionsFor Hi-Fi DSP programs For musicVideo For CINEMA-DSP programsFor audio For movieCanceling the sleep timer Using the sleep timerSetting the sleep timer Advanced OperationsPRO Logic Enhanced Enjoying 2-channel softwarePRO Logic Operation AdvancedVirtual Cinema DSP Press k/n repeatedly to select Input Mode, then press hInput Mode Displaying information about the input Source Press AMP to select the AMP modePress l / h to adjust the speaker output level Control Using the test tonePress Test on the remote Sound menu SET MenuBasic menu Input menuPress k/n repeatedly to select a menu, then press h Changing parameter settingsPress AMP, then press SET Menu to enter SP Tone Control Speaker tone control Sound menuCenter SP. GEQ Center speaker graphic Equalizer HP Tone Control Headphone toneSpeaker Set Speaker set Dynamic Range Dynamic range SP Distance Speaker distanceLFE Level Low-frequency effect level Optical Input Input menuInput Assign Input assignment Choices VCR, VIDEO1, DTV/CBL, DVD/CDInput Mode Input mode Option menuAudio Mute Mute Display Dimmer Display dimmerMemory Guard Memory guard Tuner Freq/Step Tuner frequency stepControlling this unit Remote Control FeaturesControl area Controlling other componentsSetting a code Setting manufacturer codesDefault codes Hold down Code SET while doing steps 2Controlling other components ENTElements of a sound field What is a sound fieldEditing Sound Field Parameters DSP Level DSP level Delay DelayDimension Dimension For 6ch StereoTroubleshooting GeneralOnly the speaker on Sound suddenlyGoes off One side can beSwitches to Or DTS indicator onVolume level Standby modeTuner Function properly Remote controlDoes not work or Glossary Sampling frequency and number Quantized bits Virtual Cinema DSPPCM Linear PCM Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents