Yamaha RX-SL100RDS owner manual Specifications

Page 60

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround back

[U.S.A and Canada models]

1 kHz, 0.9% THD, 6 Ω

65 W + 65 W (FTC)

[U.K. and Europe models]

 

1 kHz, 0.9% THD, 6 Ω

70 W + 70 W

1 kHz, 10% THD, 4 Ω

75 W

[Asia and General models]

 

1 kHz, 0.9% THD, 6 Ω

70 W + 70 W

•Maximum Power (EIAJ) for Front, Center, Surround, Surround back

1 kHz, 10% THD, 6 Ω

100 W

• Input Sensitivity/Input Impedance

 

[U.K. and Europe models]

150 mV/47 kΩ

VIDEO 2

EXT IN/OUT

150 mV/47 kΩ

TV IN/OUT

150 mV/47 kΩ

[Other models]

150 mV/47 kΩ

DVD/CD, etc

• Maximum Input Signal

 

[U.K. and Europe models]

 

EXT/TV

2.0 V

[Other models]

 

DVD/CD, etc

2.0 V

• Output Level/Output Impedance

 

[U.K. and Europe models]

150 mV/1.0 kΩ

EXT/TV

[Other models]

150 mV/820 Ω

DVD/CD, etc

SUBWOOFER (FRONT SP: SMALL)

3.8 V/1.2 kΩ

•Headphone Jack Rated Output/Impedance EXT IN (DVD/CD, etc.)

1 kHz, 35 mV/8 Ω

100 mV/100 Ω

• Frequency Response

 

Front (DVD/CD, etc.)

20 Hz to 50 kHz, 0/–3 dB

• Total Harmonic Distortion (FRONT SP OUT)

 

[U.K. and Europe models]

 

EXT IN (Effect Off), 1 kHz, 35 W/6 Ω

0.04% or less

[Other models]

 

DVD/CD, etc. (Effect Off), 1 kHz, 35 W/6 Ω

0.04% or less

•Signal to Noise Ratio (IHF-A Network) (SP OUT) [U.K. and Europe models]

EXT IN (Effect Off), Input shorted, 250 mV

98 dB or more

[Other models]

 

DVD/CD, etc. (Effect Off), Input shorted,

 

250 mV

98 dB or more

• Residual Noise (IHF-A Network)

 

SP OUT, Front L/R

150 µV or less

•Channel Separation (1 kHz/10 kHz) DVD/CD, etc., Effect Off, VOL. –30 dB,

1 kHz/10 kHz, 5.1 kΩ terminated

60 dB/45 dB or more

• Tone Control Characteristics

 

[Bass]

 

Boost/cut

±10 dB/60 Hz

[Treble]

 

Boost/cut

±10 dB/20 kHz

• Filter Characteristics

 

MAIN, REAR SP SMALL (H.P.F.)

fc = 90 Hz, 12 dB/oct.

SUBWOOFER (L.P.F.)

fc = 90 Hz, 18 dB/oct.

VIDEO SECTION

• Video Signal Type

 

[U.S.A., Canada and Korea models]

NTSC

[Other models]

PAL

• Video Signal Level

1 Vp-p/75 Ω

• Maximum Input Level

1.5 Vp-p

• Signal to Noise Ratio

50 dB or more

• Frequency Response (MONITOR OUT)

5 Hz to 10 MHz, –3 dB

FM SECTION

• Tuning Range

 

 

[U.S.A. and Canada models]

...........................

87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Quieting Sensitivity (IHF)

 

 

Mono (50 dB, 1 kHz, 100% MOD.)

2.8 µV (20.2 dBf)

• Signal to Noise Ratio (IHF)

 

 

Mono/Stereo

73 dB/70 dB

• Harmonic Distortion (1 kHz)

 

 

Mono/Stereo

0.5%/0.5%

• Antenna Input

75 Ω unbalanced

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

............................... 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Antenna

Loop antenna

GENERAL

• Power Supply

 

[U.S.A. and Canada models]

.............................. AC 120 V, 60 Hz

[Australia model]

AC 240 V, 50 Hz

[China model]

AC 220 V, 50 Hz

[Korea model]

AC 220 V, 60 Hz

[U.K. and Europe models]

AC 230 V, 50 Hz

[Asia model]

AC 220-240 V, 50/60 Hz

[General model]

AC 110-120 V, 50/60 Hz

• Power Consumption

100 W

• Standby Power Consumption

0.9 W

• Dimension (W x H x D)

435 x 55.5 x 330 mm

• Weight

6.4 kg

58

Page 59 Page 61
Image 60
Page 59 Page 61
Contents RX-SL100RDS For U.K. customers Special Instructions for U.K. ModelContents Features Supplied accessories Installing batteries in the remote controlGetting Started Please check that you received all of the following partsControls and Functions Front panelRemote control AMP mode Using the remote control Handling the remote controlVolume + SET MenuFront panel display Speaker Setup Speaker placementReturn the tab to secure the wire Speaker connectionsCable tags 10 mm 3/8Impedance Selector switch Impedance Selector switchSpeaker connections Front terminalsSurround terminals Surround Back terminalsBefore connecting components Connecting other componentsConnecting a TV Connecting AV componentsDigital audio connections Video 2 jacks on the front panelOptical out DVD player DTV or Connecting the antennas Connecting the AM loop antennaFrequency Step Asia and General Models only Included White BlackConnecting the power Turning on the powerConnecting the AC power Front panel Remote controlBasic Setup Using Basic setupSpeaker Set Up Speaker Level Press k/n repeatedly to select Room Size, then press EnterEnter Press k/n repeatedly to select Yes or No, then press EnterMemory back-up Press STANDBY/ON to turn on the power Adjust the volume to the desired output levelPlayback Basic operationsRemote control operation To listen with headphones Silent CinemaPress Mute on the remote control Selecting sound field programsPress DSP, then rotate VOLUME/SELECT within 5 seconds Press Night on the remote controlFront panel operation Listening at nightTuning Automatic and manual tuningAutomatic tuning LightsManual tuning DisappearsPresetting stations Automatically presetting FM stationsHold down VOLUME/SELECT for more than 6 seconds FM appears on the front panel displaySelecting preset stations Manually presetting stationsSee page 22 for tuning instructions Tune into a stationReceiving RDS stations Changing the RDS mode To cancel this functionPress PTY Seek Mode to set this unit in the PTY Seek mode Press u Preset d to select the desired program typeEON function To change the Standby Scart setting RecordingThen Sound Field Program Descriptions For Hi-Fi DSP programsType Button For musicFor CINEMA-DSP programs For audioVideo For movieUsing the sleep timer Setting the sleep timerCanceling the sleep timer Advanced OperationsEnjoying 2-channel software PRO LogicPRO Logic Enhanced Operation AdvancedVirtual Cinema DSP Press k/n repeatedly to select Input Mode, then press hInput Mode Press AMP to select the AMP mode Press l / h to adjust the speaker output levelDisplaying information about the input Source Using the test tone Press Test on the remoteControl SET Menu Basic menuSound menu Input menuChanging parameter settings Press AMP, then press SET Menu to enterPress k/n repeatedly to select a menu, then press h Sound menu Center SP. GEQ Center speaker graphic EqualizerSP Tone Control Speaker tone control HP Tone Control Headphone toneSpeaker Set Speaker set SP Distance Speaker distance LFE Level Low-frequency effect levelDynamic Range Dynamic range Input menu Input Assign Input assignmentOptical Input Choices VCR, VIDEO1, DTV/CBL, DVD/CDInput Mode Input mode Option menuDisplay Dimmer Display dimmer Memory Guard Memory guardAudio Mute Mute Tuner Freq/Step Tuner frequency stepRemote Control Features Control areaControlling this unit Controlling other componentsSetting manufacturer codes Default codesSetting a code Hold down Code SET while doing steps 2Controlling other components ENTWhat is a sound field Editing Sound Field ParametersElements of a sound field Delay Delay Dimension DimensionDSP Level DSP level For 6ch StereoTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator on Volume levelSwitches to Standby modeTuner Remote control Does not work orFunction properly Glossary Virtual Cinema DSP PCM Linear PCMSampling frequency and number Quantized bits Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents