Yamaha RX-SL100RDS Speaker Level, Press k/n repeatedly to select Room Size, then press Enter

Page 19

6Press k/n repeatedly to select Room Size, then press ENTER.

Use k/nto select the size of the room you have installed your speakers in, then press ENTER. Roughly speaking, the room sizes are defined as follows:

[U.S.A. and Canada models]

S (small)

16 x 13 ft, 200 sq. ft

 

(4.8 x 4.0 m, 20 m2)

M (medium)

20 x 16 ft, 300 sq. ft

 

(6.3 x 5.0 m, 30 m2)

L (large)

26 x 19 ft, 450 sq. ft

 

(7.9 x 5.8 m, 45 m2)

[Other models]

 

S (small)

3.6 x 2.8 m, 10 m2

M (medium)

4.8 x 4.0 m, 20 m2

L (large)

6.3 x 5.0 m, 30 m2

7Press k/n repeatedly to select Subwoofer

Set, then press ENTER.

Use k/nto select Yes or None, then press ENTER.

Yes

If you have a subwoofer in your system.

None

If you do not have a subwoofer in your system.

8Press k/n repeatedly to select Speaker Num, then press ENTER.

Use k/nto select the number of speakers connected to the unit, then press ENTER. The choices vary as follows:

Choices

Display

Speakers

 

 

 

2 spk

L C R

Front L/R

 

SL SB SR

 

 

 

 

Front L/R, Center

3 spk

L C R

SL SB SR

 

 

Front L/R, Surround L/R

4 spk

L C R

SL SB SR

 

 

Front L/R, Center, Surround L/R

5 spk

L C R

SL SB SR

 

6 spk

L C R

Front L/R, Center, Surround L/R,

Surround back

SL

SB SR

 

 

BASIC SETUP

9After you have finished the settings, press n repeatedly to select Setting OK?, then press

ENTER.

Use k/n to select Set or Cancel, then press ENTER.

Set

To apply the changes and start the test

 

tone.

Cancel

To cancel the changes and return to

 

Speaker Set Up.

Use the test tone to check the speaker levels.

If you selected Set, the display changes to “CHECK: Test Tone”, and the unit outputs a test tone from each speaker in turn. When the test tone begins, the display

changes to “CHECK OK: YES”.

Notes

•The unit cycles the test tone around each of the speakers in turn twice.

•The indicator of the speaker currently outputting the test tone flashes on the front panel display.

10Press k/n repeatedly to select Yes or No, then press ENTER.

Yes

To return to Speaker Set Up.

No

To enter Speaker Level.

■Speaker Level

Use this menu to compare and adjust the test tone output from each speaker to the output from the left front (or left surround) speaker so that the volume level for all speakers is identical.

 

Front

Speaker Set Up

Center

Speaker Level

Sur L

 

Sur R

 

Sur Back

Press ENTER to enter the Speaker Level adjustment menu, then press k/n to select a speaker and adjust the balance using l / h.

The unit outputs the test tone from the selected speaker and the left front (or left surround) speaker in turn. The indicator of the speaker currently outputting the test tone flashes on the front panel display.

PREPARATION

English

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RX-SL100RDS Special Instructions for U.K. Model For U.K. customersContents Features Please check that you received all of the following parts Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsRemote control AMP mode SET Menu Using the remote controlHandling the remote control Volume +Front panel display Speaker placement Speaker Setup10 mm 3/8 Return the tab to secure the wireSpeaker connections Cable tagsImpedance Selector switch Impedance Selector switchSurround Back terminals Speaker connectionsFront terminals Surround terminalsConnecting AV components Before connecting componentsConnecting other components Connecting a TVVideo 2 jacks on the front panel Digital audio connectionsOptical out DVD player DTV or Included White Black Connecting the antennasConnecting the AM loop antenna Frequency Step Asia and General Models onlyFront panel Remote control Connecting the powerTurning on the power Connecting the AC powerUsing Basic setup Basic SetupSpeaker Set Up Press k/n repeatedly to select Yes or No, then press Enter Speaker LevelPress k/n repeatedly to select Room Size, then press Enter EnterMemory back-up Basic operations Press STANDBY/ON to turn on the powerAdjust the volume to the desired output level PlaybackSelecting sound field programs Remote control operationTo listen with headphones Silent Cinema Press Mute on the remote controlListening at night Press DSP, then rotate VOLUME/SELECT within 5 secondsPress Night on the remote control Front panel operationLights TuningAutomatic and manual tuning Automatic tuningDisappears Manual tuningFM appears on the front panel display Presetting stationsAutomatically presetting FM stations Hold down VOLUME/SELECT for more than 6 secondsTune into a station Selecting preset stationsManually presetting stations See page 22 for tuning instructionsReceiving RDS stations Press u Preset d to select the desired program type Changing the RDS modeTo cancel this function Press PTY Seek Mode to set this unit in the PTY Seek modeEON function Recording To change the Standby Scart settingThen For music Sound Field Program DescriptionsFor Hi-Fi DSP programs Type ButtonFor movie For CINEMA-DSP programsFor audio VideoAdvanced Operations Using the sleep timerSetting the sleep timer Canceling the sleep timerOperation Advanced Enjoying 2-channel softwarePRO Logic PRO Logic EnhancedPress k/n repeatedly to select Input Mode, then press h Virtual Cinema DSPInput Mode Press l / h to adjust the speaker output level Press AMP to select the AMP modeDisplaying information about the input Source Press Test on the remote Using the test toneControl Input menu SET MenuBasic menu Sound menuPress AMP, then press SET Menu to enter Changing parameter settingsPress k/n repeatedly to select a menu, then press h HP Tone Control Headphone tone Sound menuCenter SP. GEQ Center speaker graphic Equalizer SP Tone Control Speaker tone controlSpeaker Set Speaker set LFE Level Low-frequency effect level SP Distance Speaker distanceDynamic Range Dynamic range Choices VCR, VIDEO1, DTV/CBL, DVD/CD Input menuInput Assign Input assignment Optical InputOption menu Input Mode Input modeTuner Freq/Step Tuner frequency step Display Dimmer Display dimmerMemory Guard Memory guard Audio Mute MuteControlling other components Remote Control FeaturesControl area Controlling this unitHold down Code SET while doing steps 2 Setting manufacturer codesDefault codes Setting a codeENT Controlling other componentsEditing Sound Field Parameters What is a sound fieldElements of a sound field For 6ch Stereo Delay DelayDimension Dimension DSP Level DSP levelGeneral TroubleshootingOne side can be Sound suddenlyGoes off Only the speaker onStandby mode Or DTS indicator onVolume level Switches toTuner Does not work or Remote controlFunction properly Glossary PCM Linear PCM Virtual Cinema DSPSampling frequency and number Quantized bits Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents