Yamaha RX-SL100RDS owner manual Remote control, Does not work or, Function properly

Page 57

TROUBLESHOOTING

Remote control

Problem

Cause

Remedy

Refer to

page

 

 

 

 

 

 

 

The remote control

Wrong distance or angle.

The remote control will function within a maximum

6

does not work or

 

range of 6 m (20 ft) and no more than 30 degrees off-

 

function properly.

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

 

inverter type of fluorescent lamp, etc.) is

 

 

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

3

 

 

 

 

 

The manufacturer code was not correctly

Set the manufacturer code correctly.

47

 

set.

 

 

 

Try to set the other codes of the same manufacturer.

47

 

 

 

 

 

 

 

Even if the manufacturer code is correctly

 

 

 

set, some models may not respond to the

 

 

 

remote control.

 

 

 

 

 

 

 

INFORMATION

ADDITIONAL

 

 

 

 

 

 

 

English

 

 

 

 

55

Image 57
Contents RX-SL100RDS Special Instructions for U.K. Model For U.K. customersContents Features Installing batteries in the remote control Supplied accessoriesGetting Started Please check that you received all of the following partsFront panel Controls and FunctionsRemote control AMP mode Handling the remote control Using the remote controlVolume + SET MenuFront panel display Speaker placement Speaker SetupSpeaker connections Return the tab to secure the wireCable tags 10 mm 3/8Impedance Selector switch Impedance Selector switchFront terminals Speaker connectionsSurround terminals Surround Back terminalsConnecting other components Before connecting componentsConnecting a TV Connecting AV componentsDigital audio connections Video 2 jacks on the front panelOptical out DVD player DTV or Connecting the AM loop antenna Connecting the antennasFrequency Step Asia and General Models only Included White BlackTurning on the power Connecting the powerConnecting the AC power Front panel Remote controlBasic Setup Using Basic setupSpeaker Set Up Press k/n repeatedly to select Room Size, then press Enter Speaker LevelEnter Press k/n repeatedly to select Yes or No, then press EnterMemory back-up Adjust the volume to the desired output level Press STANDBY/ON to turn on the powerPlayback Basic operationsTo listen with headphones Silent Cinema Remote control operationPress Mute on the remote control Selecting sound field programsPress Night on the remote control Press DSP, then rotate VOLUME/SELECT within 5 secondsFront panel operation Listening at nightAutomatic and manual tuning TuningAutomatic tuning LightsDisappears Manual tuningAutomatically presetting FM stations Presetting stationsHold down VOLUME/SELECT for more than 6 seconds FM appears on the front panel displayManually presetting stations Selecting preset stationsSee page 22 for tuning instructions Tune into a stationReceiving RDS stations To cancel this function Changing the RDS modePress PTY Seek Mode to set this unit in the PTY Seek mode Press u Preset d to select the desired program typeEON function To change the Standby Scart setting RecordingThen For Hi-Fi DSP programs Sound Field Program DescriptionsType Button For musicFor audio For CINEMA-DSP programsVideo For movieSetting the sleep timer Using the sleep timerCanceling the sleep timer Advanced OperationsPRO Logic Enjoying 2-channel softwarePRO Logic Enhanced Operation AdvancedPress k/n repeatedly to select Input Mode, then press h Virtual Cinema DSPInput Mode Press AMP to select the AMP mode Press l / h to adjust the speaker output levelDisplaying information about the input Source Using the test tone Press Test on the remoteControl Basic menu SET MenuSound menu Input menuChanging parameter settings Press AMP, then press SET Menu to enterPress k/n repeatedly to select a menu, then press h Center SP. GEQ Center speaker graphic Equalizer Sound menuSP Tone Control Speaker tone control HP Tone Control Headphone toneSpeaker Set Speaker set SP Distance Speaker distance LFE Level Low-frequency effect levelDynamic Range Dynamic range Input Assign Input assignment Input menuOptical Input Choices VCR, VIDEO1, DTV/CBL, DVD/CDOption menu Input Mode Input modeMemory Guard Memory guard Display Dimmer Display dimmerAudio Mute Mute Tuner Freq/Step Tuner frequency stepControl area Remote Control FeaturesControlling this unit Controlling other componentsDefault codes Setting manufacturer codesSetting a code Hold down Code SET while doing steps 2ENT Controlling other componentsWhat is a sound field Editing Sound Field ParametersElements of a sound field Dimension Dimension Delay DelayDSP Level DSP level For 6ch StereoGeneral TroubleshootingGoes off Sound suddenlyOnly the speaker on One side can beVolume level Or DTS indicator onSwitches to Standby modeTuner Remote control Does not work orFunction properly Glossary Virtual Cinema DSP PCM Linear PCMSampling frequency and number Quantized bits Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.