Yamaha RX-SL100RDS DSP Level DSP level, Delay Delay, For 6ch Stereo, Dimension Dimension

Page 52

EDITING SOUND FIELD PARAMETERS

3Press k/n repeatedly to access the sound field program parameters.

ENTER

4Press l / h repeatedly to adjust the sound field parameter.

ENTER

5To change parameter values for a different sound field, repeat steps 2 through 4.

Note

You cannot change parameter values when Memory Guard is set to “ON”. If you want to change the parameter values, set Memory Guard to “OFF” (see page 45).

■DSP LEVEL (DSP level)

Function:

This parameter adjusts the level of all the

 

DSP effect sounds within a narrow

 

range.

Description:

Depending on the acoustics of you

 

listening room, you may want to increase

 

or decrease the DSP effect level relative

 

to the level of the direct sound.

Control range:

–6 dB – +3 dB

■DELAY (Delay)

Function:

This parameter changes the apparent

 

distance from the source sound by

 

adjusting the delay between the direct

 

sound and the first reflection heard by

 

the listener.

Description:

The smaller the value, the closer the

 

sound source seems to the listener. The

 

larger the value, the farther it seems. For

 

a small room, set to a small value. For a

 

large room, set to a large value.

Control range:

1 – 99 msec

For 6ch Stereo

Function:

These parameter adjusts the volume level

 

for each channel in 6-channel stereo

 

mode.

Control Range:

0 – 100%

■CT LEVEL (Center level)

■SL LEVEL (Surround left level)

■SR LEVEL (Surround right level)

■SB LEVEL (Surround back level) For PRO LOGIC II Music

■PANORAMA (Panorama)

Function:

Extends the front stereo image to include

 

the surround speakers for wraparound

 

effect.

Choices:

OFF/ON, initial setting is OFF.

■DIMENSION (Dimension)

Function:

Gradually adjusts the sound field either

 

towards the front or towards the rear.

Control range:

–3 (towards the rear) to +3 (towards the

 

front), initial setting is STD (standard).

■CT WIDTH (Center width)

Function:

Adjusts the center image from all three

 

front speakers to varying degrees. A

 

larger value adjusts the center image

 

towards the front left and right speakers.

Control range:

0 (center channel sound is output only

 

from center speaker) to 7 (center channel

 

sound is output only from front left and

 

right speakers), initial setting is 3.

For PRO LOGIC II Music, Movie and Game

■PLII/PLIIx (Pro Logic II/Pro Logic IIx)

Function:

Switches the type of Pro Logic decoding

 

to be used. PLII decoding creates 5.1-

 

channel sound from 2-channel sources.

 

PLIIx decoding creates 6.1-channel

 

sound from 2-channel sources.

Choices:

PLII, PLIIx

For DTS Neo:6 Music

■C. IMAGE (Center image)

Function:

This parameter adjusts the center image

 

from all three front speakers to varying

 

degrees.

Control range:

0 – 0.5

50

Page 51 Page 53
Image 52
Page 51 Page 53
Contents RX-SL100RDS For U.K. customers Special Instructions for U.K. ModelContents Features Supplied accessories Installing batteries in the remote controlGetting Started Please check that you received all of the following partsControls and Functions Front panelRemote control AMP mode Using the remote control Handling the remote controlVolume + SET MenuFront panel display Speaker Setup Speaker placementReturn the tab to secure the wire Speaker connectionsCable tags 10 mm 3/8Impedance Selector switch Impedance Selector switchSpeaker connections Front terminalsSurround terminals Surround Back terminalsBefore connecting components Connecting other componentsConnecting a TV Connecting AV componentsVideo 2 jacks on the front panel Digital audio connectionsOptical out DVD player DTV or Connecting the antennas Connecting the AM loop antennaFrequency Step Asia and General Models only Included White BlackConnecting the power Turning on the powerConnecting the AC power Front panel Remote controlUsing Basic setup Basic SetupSpeaker Set Up Speaker Level Press k/n repeatedly to select Room Size, then press EnterEnter Press k/n repeatedly to select Yes or No, then press EnterMemory back-up Press STANDBY/ON to turn on the power Adjust the volume to the desired output levelPlayback Basic operationsRemote control operation To listen with headphones Silent CinemaPress Mute on the remote control Selecting sound field programsPress DSP, then rotate VOLUME/SELECT within 5 seconds Press Night on the remote controlFront panel operation Listening at nightTuning Automatic and manual tuningAutomatic tuning LightsManual tuning DisappearsPresetting stations Automatically presetting FM stationsHold down VOLUME/SELECT for more than 6 seconds FM appears on the front panel displaySelecting preset stations Manually presetting stationsSee page 22 for tuning instructions Tune into a stationReceiving RDS stations Changing the RDS mode To cancel this functionPress PTY Seek Mode to set this unit in the PTY Seek mode Press u Preset d to select the desired program typeEON function Recording To change the Standby Scart settingThen Sound Field Program Descriptions For Hi-Fi DSP programsType Button For musicFor CINEMA-DSP programs For audioVideo For movieUsing the sleep timer Setting the sleep timerCanceling the sleep timer Advanced OperationsEnjoying 2-channel software PRO LogicPRO Logic Enhanced Operation AdvancedVirtual Cinema DSP Press k/n repeatedly to select Input Mode, then press hInput Mode Press l / h to adjust the speaker output level Press AMP to select the AMP modeDisplaying information about the input Source Press Test on the remote Using the test toneControl SET Menu Basic menuSound menu Input menuPress AMP, then press SET Menu to enter Changing parameter settingsPress k/n repeatedly to select a menu, then press h Sound menu Center SP. GEQ Center speaker graphic EqualizerSP Tone Control Speaker tone control HP Tone Control Headphone toneSpeaker Set Speaker set LFE Level Low-frequency effect level SP Distance Speaker distanceDynamic Range Dynamic range Input menu Input Assign Input assignmentOptical Input Choices VCR, VIDEO1, DTV/CBL, DVD/CDInput Mode Input mode Option menuDisplay Dimmer Display dimmer Memory Guard Memory guardAudio Mute Mute Tuner Freq/Step Tuner frequency stepRemote Control Features Control areaControlling this unit Controlling other componentsSetting manufacturer codes Default codesSetting a code Hold down Code SET while doing steps 2Controlling other components ENTEditing Sound Field Parameters What is a sound fieldElements of a sound field Delay Delay Dimension DimensionDSP Level DSP level For 6ch StereoTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator on Volume levelSwitches to Standby modeTuner Does not work or Remote controlFunction properly Glossary PCM Linear PCM Virtual Cinema DSPSampling frequency and number Quantized bits Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents