Yamaha RX-SL100RDS owner manual SP Distance Speaker distance, LFE Level Low-frequency effect level

Page 44

SET MENU

■SP Distance (Speaker distance)

Use this feature to manually input the distance of each speaker and adjust the delay applied to respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sound will arrive at the listening position at the same time. To access these parameters, select:

SOUND menu > SP Distance >

HP Tone Control

Surround

Speaker Set

Surround Back

SP Distance

Unit Setting

LFE Level

Front

Dynamic Range

Center

Unit Setting (Unit setting)

Choices: Meter (m), Feet (ft)

Initial setting: U.S.A. and Canada models: Feet (ft) Other models: Meter (m)

•Select Meter to input speaker distances in meters.

•Select Feet to input speaker distances in feet.

Front

Adjusts the distance of the front left and right speakers. Choices: 0.3 to 24.00 m (1 to 80 ft)

Initial setting: 3.0 m (10.0 ft)

Center

Adjusts the distance of the center speaker.

Choices: 0.3 to 24.00 m (1 to 80 ft)

Initial setting: 3.0 m (10.0 ft)

Surround

Adjusts the distance of the surround left and right speakers.

Choices: 0.3 to 24.00 m (1 to 80 ft)

Initial setting: 3.0 m (10.0 ft)

Surround Back

Adjusts the distance of the surround back speaker. Choices: 0.3 to 24.00 m (1 to 80 ft)

Initial setting: 2.10 m (7.0 ft)

■LFE Level (Low-frequency effect level)

Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low- frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

To access these parameters, select: SOUND menu > LFE Level

Speaker Set

 

SP Distance

 

LFE Level

Speaker

Dynamic Range

Headphone

Center SP. GEQ

 

Choices: –20 to 0 (dB)

Speaker (Speaker LFE level)

Select to adjust the speaker LFE level.

Headphone (Headphone LFE level)

Select to adjust the headphone LFE level.

Note

Depending on the settings of LFE Level, some signals may not be output from the SUBWOOFER jack.

■Dynamic Range (Dynamic range)

Use to select the amount of dynamic range compression to be applied to your speakers or headphones when using NIGHT (see page 21). This setting is effective only when the unit is decoding Dolby Digital signals.

To access these parameters, select: SOUND menu > Dynamic Range >

SP Distance

 

LFE Level

 

Dynamic Range

Speaker

Center SP. GEQ

Headphone

SP Tone Control

 

Choices: MAX, STD, MIN

Speaker (Speaker dynamic range)

Select to adjust the speaker compression.

Headphone (Headphone dynamic range)

Select to adjust the headphone compression.

•Select MAX for feature films.

•Select STD for general use.

•Select MIN for listening to sources at low volume levels.

42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-SL100RDS For U.K. customers Special Instructions for U.K. ModelContents Features Supplied accessories Installing batteries in the remote controlGetting Started Please check that you received all of the following partsControls and Functions Front panelRemote control AMP mode Using the remote control Handling the remote controlVolume + SET MenuFront panel display Speaker Setup Speaker placementReturn the tab to secure the wire Speaker connectionsCable tags 10 mm 3/8Impedance Selector switch Impedance Selector switchSpeaker connections Front terminalsSurround terminals Surround Back terminalsBefore connecting components Connecting other componentsConnecting a TV Connecting AV componentsOptical out DVD player DTV or Digital audio connectionsVideo 2 jacks on the front panel Connecting the antennas Connecting the AM loop antennaFrequency Step Asia and General Models only Included White BlackConnecting the power Turning on the powerConnecting the AC power Front panel Remote controlSpeaker Set Up Basic SetupUsing Basic setup Speaker Level Press k/n repeatedly to select Room Size, then press EnterEnter Press k/n repeatedly to select Yes or No, then press EnterMemory back-up Press STANDBY/ON to turn on the power Adjust the volume to the desired output levelPlayback Basic operationsRemote control operation To listen with headphones Silent CinemaPress Mute on the remote control Selecting sound field programsPress DSP, then rotate VOLUME/SELECT within 5 seconds Press Night on the remote controlFront panel operation Listening at nightTuning Automatic and manual tuningAutomatic tuning LightsManual tuning DisappearsPresetting stations Automatically presetting FM stationsHold down VOLUME/SELECT for more than 6 seconds FM appears on the front panel displaySelecting preset stations Manually presetting stationsSee page 22 for tuning instructions Tune into a stationReceiving RDS stations Changing the RDS mode To cancel this functionPress PTY Seek Mode to set this unit in the PTY Seek mode Press u Preset d to select the desired program typeEON function Then To change the Standby Scart settingRecording Sound Field Program Descriptions For Hi-Fi DSP programsType Button For musicFor CINEMA-DSP programs For audioVideo For movieUsing the sleep timer Setting the sleep timerCanceling the sleep timer Advanced OperationsEnjoying 2-channel software PRO LogicPRO Logic Enhanced Operation AdvancedVirtual Cinema DSP Press k/n repeatedly to select Input Mode, then press hInput Mode Displaying information about the input Source Press AMP to select the AMP modePress l / h to adjust the speaker output level Control Using the test tonePress Test on the remote SET Menu Basic menuSound menu Input menuPress k/n repeatedly to select a menu, then press h Changing parameter settingsPress AMP, then press SET Menu to enter Sound menu Center SP. GEQ Center speaker graphic EqualizerSP Tone Control Speaker tone control HP Tone Control Headphone toneSpeaker Set Speaker set Dynamic Range Dynamic range SP Distance Speaker distanceLFE Level Low-frequency effect level Input menu Input Assign Input assignmentOptical Input Choices VCR, VIDEO1, DTV/CBL, DVD/CDInput Mode Input mode Option menuDisplay Dimmer Display dimmer Memory Guard Memory guardAudio Mute Mute Tuner Freq/Step Tuner frequency stepRemote Control Features Control areaControlling this unit Controlling other componentsSetting manufacturer codes Default codesSetting a code Hold down Code SET while doing steps 2Controlling other components ENTElements of a sound field What is a sound fieldEditing Sound Field Parameters Delay Delay Dimension DimensionDSP Level DSP level For 6ch StereoTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator on Volume levelSwitches to Standby modeTuner Function properly Remote controlDoes not work or Glossary Sampling frequency and number Quantized bits Virtual Cinema DSPPCM Linear PCM Specifications VCR WC19140-1

RX-SL100RDS specifications

The Yamaha RX-SL100RDS is a versatile and compact stereo receiver that caters to both casual listeners and audiophiles alike. Its sleek design and advanced technologies provide an enjoyable audio experience, making it a great addition to any home entertainment setup.

One of the standout features of the RX-SL100RDS is its ability to deliver high-quality sound. Powered by Yamaha’s proprietary technology, the receiver boasts a dynamic power output that allows it to drive speakers with clarity and precision. The high-fidelity audio performance is complemented by the advanced digital signal processing, which enhances the overall listening experience across various music genres.

In terms of connectivity, the RX-SL100RDS supports a range of input options, including multiple analog and digital inputs, allowing users to connect various audio sources seamlessly. The inclusion of Bluetooth technology enables wireless streaming from smartphones, tablets, and other compatible devices, affording users enhanced flexibility and convenience.

The built-in RDS (Radio Data System) tuner is another noteworthy feature, enabling users to access a wide array of FM stations along with useful information, such as station names and song titles. The tuner’s automatic memory function makes it easy to store preferred stations for quick access.

Yamaha's YPAO (Yamaha Parametric room Acoustic Optimizer) technology is integrated into the RX-SL100RDS, allowing for automatic audio calibration. This innovative feature analyzes the room's acoustics and adjusts the output for optimal sound quality, providing an enhanced auditory experience in any environment.

The design of the RX-SL100RDS is both stylish and functional. Its compact size makes it suitable for smaller spaces, without compromising on performance. The user-friendly interface, complete with an easy-to-read display, ensures that navigating through settings and options is hassle-free.

Additionally, the receiver is equipped with advanced thermal management systems that provide reliable performance during extended listening sessions. With its durable build quality and classic Yamaha aesthetics, the RX-SL100RDS is not only reliable in performance but also visually appealing.

Overall, the Yamaha RX-SL100RDS is a feature-packed stereo receiver that combines advanced audio technology, user-friendly connectivity options, and elegant design, making it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents