Kodak T700 manual Unloading the Film, Automatic rewind, Wait for the film to completely

UNLOADING THE FILM

Automatic rewind

3.Remove the film cassette from the camera and reload with new KODAK ADVANTIX Film.

The camera automatically rewinds the film into the cassette after the last exposure.

1. Wait for the film to completely

rewind into the film cassette and

for the motor to stop running.

• When the motor stops running, the

frame counter (39) indicates 0 and

the “film-presence indicator (38)”

blinks on the LCD panel (13).

•The FSI on the fully- exposed film cassette is at ✖

(#3 position) and “E” blinks on the

LCD panel.

	3	4
2		1

2. Rotate the film-door lever (10) to open

the film door (18).

Mid-roll change (MRC)

You can remove your film in mid-roll and later reload it and continue picture-taking. The Film Status Indicator (FSI) on a partially exposed film cassette is set

to ◗ (#2 position). When you reload the film cassette into the camera, the camera automatically advances the film to the first unexposed frame. Film can be rewound and reloaded until the last picture is taken. The camera automati- cally rewinds the film and sets the FSI to ✖ (#3 position) when the last picture

is taken.

27