Philips Video Camera manual Setting Address ID of Dome Camera, Dome ID

Figure 11 - Termination Diagram

2.4 Setting Address (ID) of Dome Camera

To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras using a multiplexer, it is suggested that the dome camera address matches the multiplexer port number.

If you wan to set the address more than 999, you should connect the service provider.

Example: Port 1 = Dome 1, Port 2 = Dome 2 ... Port 16 = Dome 16. If more than 16 dome cameras are installed using two or more multiplexers, ID of the dome camera should be ID of MUX x No. of camera IN. (e.g. multiplexer ID= n, Camera IN= m then ID of Dome =16x(n-1)+m )

Refer to Figures 4-5 for setting the dome camera address (ID) and protocol selection.

Dome ID	S3	S2	S1
1	0	0	1
2	0	0	2
…	…	…	…
999	9	9	9

Beyond ID 999, contact your service provider.

Figure 12 - Setting Address (ID) of Dome Camera

12