Sharp VL-NZ100S manual As S E T T E

Operation References

Operation References

Warning Indicators

If a warning indicator appears on the screen, follow the specified instructions.

Displayed for the first			Displayed after		Description of warning
3 seconds			3 seconds
I NS E R T					There is no video cassette in the camcorder.
A C AS S E T T E .					Insert a cassette (see page 12).
E J E C T	THE		E J E C T	THE	The video cassette is defective and should be
CAS SE T T E .			CAS SE T T E .		removed (see page 12).
CASSE T T E		NOT	P RO T E C T . T A B		The erasure protect tab on the video cassette
					has been slid to the record-protect position,
RE CORDA BL E.
					preventing recording (see page 72).
THE TAPE			T A PE	E ND	The tape is about to end. Prepare a new
ENDS	SOON.				cassette (see page 12).
CHANGE	THE		T APE	END	The tape has reached the end. Replace it with a
CAS SE T T E .					new cassette (see page 12).
BAT T ERY		I S			The battery is almost depleted. Replace it with a
TOO	LOW.				fully charged battery pack (see page 9).
					Dew has formed inside the camcorder. Wait a
DEW			DEW		few hours for the dew to dry away (see
					page iv).
					About 10 seconds after this warning appears,
					the camcorder automatically turns off.
					The video heads are clogged and should be
					cleaned (see page v).
					The fluorescent lamp behind the LCD monitor is
L AMP			L AMP		close to the end of its service life. Call your local
					authorized Sharp dealer to have it replaced.
					The battery is almost depleted when the
					camcorder transfers data through the USB
U S B			U S B		cable. Use the AC adapter or fully charged
					battery pack as the power source (see pages
					9–11, 66).

7

VL-NZ100H-001-008 7 02.2.14, 9:58 AM