Sharp VL-NZ100S manual Manual Exposure, Advanced Features Camera Recording, Screen is displayed

Advanced Features

Camera Recording

Manual Exposure	To return to Auto Exposure mode
Available modes:	Press the SET button while the exposure setting
	screen is displayed.
TAPE-CAMERA, CARD-CAMERA
	Note:

The camcorder is preset to Auto Exposure mode, which automatically selects the optimal aperture. However, when there is too much contrast in brightness between the subject and background, you may not be able to record a clear image. In this case, use the manual exposure function to correct the exposure level.

Background is too bright and subject too dark (backlit subject).

•Increase the exposure level to allow more light through the lens.

•Manual Exposure mode will cancel if a scene setting is selected thereafter.

Advanced Features

Subject is too bright against background.

•Decrease the exposure level to allow less light through the lens.

1 In TAPE-CAMERA or CARD-CAMERA mode, press the MANUAL button until the exposure setting screen appears.

A U T O	A U T O
E X P O S U R E

2 Press l or m to select the desired exposure level.

•The number shown is the selected exposure level. The adjustment range is from +5 (least light) to L5 (most light).

MA N U A L	+ 2
E X P O S U R E

Exposure level

3 Press the MANUAL button until the normal screen appears.

43

VL-NZ100H-042-046 43 02.2.14, 10:01 AM