Sharp VL-NZ100S Properly inserted see, New one see, Recognize, Camcorder see, See, Setting see

			Operation
NO		The card is not inserted or is inserted improperly. Check that it is	References
Displayed for		Description of warning
5 seconds
MEMORY	C ARD	properly inserted (see page 13).
MEMORY	C ARD	The capacity of the card is full and cannot store any more images.
		Delete unnecessary images (see page 61) or replace the card with a
F U L L
		new one (see page 13).
NO DA T A ON		The card has no images recorded in the format the camcorder can
MEMORY	CARD	recognize.
MEMORY	CARD	The images in the card are corrupted or recorded in a format which is
		not compatible with this camcorder. Format the card to use it with this
ERROR
		camcorder (see page 58).
F ORMA T	CARD	The card has not been formatted with this camcorder. Format the card
MEMORY		(see page 58).
MEMORY	CARD	The card is write-protected (see pages 13, 74).
PROT E C T ED
DA T A		You are trying to delete a protected image. Cancel the protection
P RO T E C T E D		setting (see page 60).
MEMORY	CARD	The selected image cannot be read by this camcorder. Format the
RE AD ERROR		card to use it with this camcorder (see page 58).
CANNOT		The card cannot record any data due to a problem with the card or
S TORE DA T A		data on the card. Replace the card (see page 13).

Note:

• Nindicates a flashing display.

8

VL-NZ100H-001-008 8 02.2.14, 9:58 AM