Sharp VL-NZ100S manual Self Recording, More Information on Self Re- cording

Set the Power switch to CAMERA.

Useful Features Camera Recording

Self Recording

Available modes:

TAPE-CAMERA, CARD-CAMERA

Rotate the LCD monitor 180° vertically so that the screen faces the other way and the subject can monitor the shot while you are recording.

If the camcorder is steadied, you can record yourself in the scene by watching yourself on the LCD monitor. The remote control is useful for such occasions.

Cautions:

•Do not rotate the monitor section to the self recording position during recording or playback.

•For recording in Self Recording mode, be sure to rotate the monitor section, NOT the lens section. If you hold the camcorder upside down with the lens at the bottom, the subject will be recorded upside down.

Useful Features

1 Set the Media Selection switch to TAPE or CARD.

2

3 Rotate the monitor section 180° vertically.

•A mirror image of the subject displays on the LCD monitor.

More Information on Self Re- cording

•Use the remote control to begin/stop recording on tape.

•The screen image automatically inverts when the monitor rotation is between 135° and 200°. When the monitor section is turned back to the normal position, the image returns to normal.

•You can play back images while the monitor is in the self recording position. Set the camcorder to TAPE-VCR mode. The Operation button still retains its function as during normal playback, for example, m on the Operation button works as the Play button.

4 Begin recording.

35

VL-NZ100H-031-037 35 02.2.14, 10:00 AM