Sharp VL-NZ100S SD Memory Card AC Adapter, Replacing the Fluorescent Lamp, Protecting your data

Page 85

SD Memory Card

AC Adapter

Precautions on handling SD Memory Cards

After removing the card from the camcorder, be sure to immediately store it in the card case.

Do not disassemble or modify the card.

Do not strike, bend, drop, or allow the card to become wet.

Do not touch the metal terminals with your hands or metallic objects.

Do not peel off the label from the card.

Do not attach other labels or stickers to the card.

Do not use or store the card in locations directly exposed to sunlight, heat vents, heating appliances, or other locations with extremely high temperatures such as inside a closed vehicle in the summer.

Do not use or store the card in humid or dusty locations.

Do not use or store the card in locations exposed to corrosive gases.

Protecting your data

Back view

Write-protect switch

The AC adapter may interfere with reception if used near a radio.

Prevent flammables, liquids, and metal objects from entering the adapter.

The adapter is a sealed unit. Do not attempt to open or modify it.

Do not damage, drop, or subject the adapter to vibration.

Do not leave the adapter in direct sunlight.

Avoid using the adapter in humid or ex- tremely hot places.

Replacing the Fluorescent Lamp

This camcorder uses a fluorescent lamp to backlight the LCD monitor. If the monitor becomes dark or difficult to view, the fluores- cent lamp may need to be replaced. Contact the nearest SHARP service centre or your dealer for further advice.

Set the write-protect switch to “LOCK”. Set the switch to the unlocked side when you want to record or edit the card again.

Do not remove the card or turn off the power of the camcorder and peripheral equipment while data is being read or written. Also do not remove the power source from the camcorder. These actions can cause data to be destroyed. (Please be aware that Sharp Corporation cannot be held liable for any data loss or other loss directly or indirectly caused by data loss.)

Make backup copies of your data wherever possible.

Appendix

74

VL-NZ100H-074-080

74

02.2.14, 10:05 AM

Image 85
Contents Gedruckt in Japan Imprimé au Japon TINSLA006WJZZ 02P03-JKG Sharp CorporationPower supply Special Note for Users in the U.K Supplied Accessories Optional Accessories Iii When using your camcorder in a cold enviDew Formation What is dew formation?Using a Cleaning Tape Commercially Available Precautions Dirty Video HeadsAvailable mode Causes of video head cloggingContents Contents Viii Digital Still Camera Features AppendixCompartment door Part NamesCard selection Media SelectionPp , 30 Operation ReferencesTAPE-VCR mode TAPE-CAMERA modeOn-screen Display Index Operation ReferencesCARD-VCR mode CARD-CAMERA modeExample screens shown are for TAPE-CAMERA mode On-screen indicators on/offManual screens AS S E T T E Properly inserted see Setting seeNew one see Card has no images recorded in the format the camcorder canAttaching Attaching and Removing the Battery PackRemoving PreparationExtending battery pack life Charging the Battery Pack1Fully charge the battery pack BatteryPreparation Powering the Camcorder from an AC OutletInserting Inserting and Removing a CassettePerform above, then take out the cassette Inserting and Removing a Card About the write-protect switchClose the card slot cover Installing Installing the Lithium BatteryTime Setting the DateT T I NG Attaching the Lens Hood Changing to the 12-hour Time ModeAttaching the Wrist Strap Press l or m to select 12H, then press the SET buttonAttach the strap to the lens cap as shown below Using the Lens CapHolding the camcorder Tips on Recording PositionsBasic posture Shooting from a high angleTAPE-CAMERA mode TAPE-VCR mode Selecting the Camcorder ModeCARD-CAMERA mode CARD-VCR mode Camcorder modesTo turn the power off Easy Camera Recording on Tape in Full Auto ModeTo pause recording Press the REC START/STOP button to begin recordingMacro Shots Zooming Auto FocusBasic Operations Camera Recording ZoomingRemaining Recording Time Display Remaining Battery Power DisplayTape Playback Using Earphones Commercially AvailableTo stop playback Still Volume ControlVideo Search Searching for a Scene Near the Current Tape PositionBasic Operations Playback Watching Playback on aTo turn off the menu screen Using the Menu ScreensPress the Menu button ExampleGU I DE Displaying Recording GuideTypes Turning on the recording guideTo use optical zoom only Setting the Digital ZoomSelect OFF in above Press lor mto select 40 or 300, then press the SET buttonTo cancel Gamma Brightness Compen- sation Useful features Camera RecordingGamma Brightness Compensation To obtain a brighter picturePress the GAMMA/BRIGHTER button again Eindicator appears To cancel the gain-up functionGain-up To cancel Fade mode UsingFade In and Fade Out To use Fade Out onlyEdit Search Quick ReturnRecording Standby Mode, press and holdStill Recording on Tape To cancel the still imageAttaching the Supplied Tripod Adapter To pause recordingWide Screen To cancel DIS functionDigital Image Stabilization DIS To return to normal screenMore Information on Self Re- cording Self RecordingTo return to SP mode Recording in LP Long Play Recording ModeAP E SP E E D LP Press l or m to select LP, then press the SET buttonTo return to 12-bit audio recording mode Selecting the 16-bit Audio Recording ModePress l or m to select 16bit, then press the SET button Select 12bit in aboveInstalling the Batteries Using the Remote ControlRemo T E on ActivatingDisplaying the Date and Time of Recording Useful Features PlaybackSlow S P L AYGamma Playback To cancel Gamma PlaybackCopying an Image from Tape to Card Gamma Playback has no effect during still playbackPicture Effect Playback To cancel Picture Effect PlaybackPress l or m to select the desired Picture effect, then press the SETManual Focus To return to Auto Focus modeTo return to Auto Exposure mode Advanced Features Camera RecordingManual Exposure Screen is displayedTo return to Auto White Balance mode Setting the Camcorder to Full Auto modeWhite Balance Lock Digital Picture Effects To cancel the digital picture effectScene settings cannot be used when displaying a still image To cancel the scene settingScene Menu Program AE SC E NE Menu SportOU T Using the Time CodeDisplay format Displaying the time code on a TV during playbackCutting Unwanted Sequences EditingTo stop editing RecordingRecording from an External Source Advanced Features PlaybackTo Record from an External Source To stop recordingL G D G T L O N Using the Camcorder as a ConverterTo DV terminal Digital equipmentTerminal IEEE1394 Editing with the DVTo Record from Video Equip MentAUD I O Selecting the Audio Playback ModeYou can select any of the following audio playback modes Normal recording mode Audio Dubbing FeatureAudio Dubbing mode Audio RecordingAudio Dubbing To cancel audio dubbingTo pause audio dubbing Press the Menu button. The audio dubbing screen disappearsPress the Still button fully to begin recording Selecting the Picture Quality Picture quality Approx. number SettingDigital Still Camera Features Card Recording TimerRecording with the Self Formatting a Card Available Operations during Full-screen Display Card PlaybackPress j, k, l or m on the Operation Button to move the selection frame toDelete Protection To cancel the protection set- tingDeleting Stored Images Digital Still Camera Features PlaybackDeleting One Stored Image Press j, k, l or m to select the image to be deletedDeleting All Stored Images About Dpof Print OrderAssigning Print Order to an Image To cancel the print order for all images To cancel the print order for an imageAssigning Print Order to All Images Transferring Data on Installing the USB driverCard to Computer System RequirementsImage Folders and File Names Disconnecting the USB cableWindows ME Windows XPTo stop Slide Show Playback Slide Show PlaybackPress l or m to select Slide Show Adjusting the Picture Picture/Backlight AdjustmentsAdjusting the Backlight Appendix Turning off Confirmation SoundPress l or m to select OFF, then press the SET button Useful Information Use a wide-angle setting for fast-moving subjectsHints for Better Shooting Lighting SD Memory Card MultiMediaCard Appendix DV Technology DV and conventional video cassette tapes Mini DV Cassette Precautions when using a Mini DV cassetteCopyright Protection To protect recordings against acciden- tal erasureAppendix MultiMediaCard Precautions on handling MultiMediaCardsWatch out for static electricity Watch out for condensationSD Memory Card AC Adapter Precautions on handling SD Memory CardsReplacing the Fluorescent Lamp Protecting your dataThis camcorder uses a lithium-ion type battery pack Appendix Battery PackCharging StorageAC Adapter Supplied Accessory Cleaning Using Your Camcorder AbroadDemo Mode of F Demonstration ModeCancelling Demo Mode EMO MOD E onPower Before Requesting ServiceCard Specifications are subject to change without notice SpecificationsCamcorder AC Adapter UADP-0342TAZZ