Sharp VL-NZ100S manual Using the Time Code, Ou T, Display format, To turn off the time code

Advanced Features

Advanced Features

Playback

Using the Time Code

Available modes:

TAPE-VCR, TAPE-CAMERA

The time code shows the hour, minute and second of recording, and the frame number (1 frame = approx. 1/25 sec.). This is automati- cally recorded along with the subject when you are recording on the tape. You can display the time code on the screen as an accurate counter in both TAPE-VCR and TAPE-CAMERA modes.

Display format

T C 0 0 0 1 0 2 0

			Frame number*
		Second
	Minute		* Displayed during still
Hour			playback.

•The example screens shown are for TAPE-VCR mode.

1 During playback or camera recording in TAPE modes, press the MENU button until the menu screen appears.

2 Press l or m on the operation button to select I, then press the SET button.

3 Press l or m to select “TIME CODE”, then press the SET button.

O T H E R S
	R E MO T E
	B E E P
	T I ME C O D E	D I S P . O F F
	T C OU T	D I S P . ON
	R E T U RN

5 Press the MENU button to turn off the menu screen.

•The time code appears when the on- screen indicators are turned on.

T C 0 : 0 5 : 3 5

A UD I O 1 + 2

Time code

To turn off the time code

Select “DISP. OFF” in step 4 above.

Note:

•When the tape reaches an unrecorded section, the time code returns to zero (TC0:00:00). Once recorded, the time code cannot be changed.

Displaying the time code on a TV during playback

1 In TAPE-VCR mode, press the MENU button until the menu screen appears.

2 Press l or m on the operation button to select I, then press the SET button.

3 Press l or m to select “TC OUT”, then press the SET button.

O T H E R S
R E MO T E
B E E P
T I ME C O D E	O F F
T C OU T
R E T U RN	O N

4 Press l or m to select “ON”, then press the SET button.

T C OU T ON

4 Press l or m to select “DISP. ON”, then press the SET button.

T I ME CODE D I SP. ON

5 Press the MENU button to turn off the menu screen.

47

VL-NZ100H-047-054 47 02.2.14, 10:02 AM