Sharp VL-NZ100S Selecting the Camcorder Mode, Camcorder modes, TAPE-CAMERA mode TAPE-VCR mode

Basic Operations

Camera Recording

Selecting the Camcorder Mode

This camcorder includes functions for use as both a video camera for recording and playing back images on tapes and as a digital still camera for recording and playing back still images on cards. One of the following camcorder modes needs to be set before starting any operation.

Power switch

Media Selection switch

Basic Operations

19

Camcorder modes

TAPE-CAMERA mode		TAPE-VCR mode
For recording motion and still images on a		For playing back or editing motion and still
tape.		images recorded on a tape.
1	Set the Media Selection	1	Set the Media Selection
	switch to TAPE.		switch to TAPE.
2	Hold down the Lock button	2	Hold down the Lock
	and set the Power switch		button and set the Power
	to CAMERA.		switch to VCR.
	Lock button		Lock button
CARD-CAMERA mode		CARD-VCR mode
For recording still images on a		For playing back still images recorded on a
card.		card.
1	Set the Media Selection	1	Set the Media Selection
	switch to CARD.		switch to CARD.
2	Hold down the Lock button	2	Hold down the Lock
	and set the Power switch		button and set the Power
	to CAMERA.		switch to VCR.
	Lock button		Lock button

Note:

• To turn the power off, set the Power switch to OFF without pressing the Lock button.

Caution:

•Do not change the camcorder mode by operating the Media Selection switch during recording or playback, as this may cause damage to the tape or card.

VL-NZ100H-019-025 19 02.2.14, 9:59 AM