Using a Tripod
This lens is equipped with a detachable rotating tripod collar. Attach the tripod to the tripod collar instead of the camera (Fig. 5). For vertical shooting, you can rotate the camera 90° to the right or left. Loosen the tripod collar lock screw © slightly, turn the camera to the vertical position @ , and tighten the screw. (Fig. 6) For more comfortable
Lens Care
•Clean the lens surface with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from center to outer edge, taking care not to leave traces or touch other parts.
•Never use thinner or benzene to clean the lens as this might damage the lens, result in a fire, or cause health problems.
•To protect the front lens element, an NC filter is recommended at all times. A lens hood also helps protect the front of the lens.
•When storing the lens in the lens case, attach both front and rear caps.
•When the lens will not be used for a long time, store it in a cool, dry place to prevent mold. Also store the lens away from direct sunlight or chemicals such as camphor or naphthalene.
•Do not get water on the lens or drop it in water as this will cause it to rust and malfunction.
•Reinforced plastic is used for some parts of the lens. To avoid damage, never leave the lens in an excessively hot place.
Supplied Accessories
77mm
Hard Case
Optional Accessories
77mm
Teleconverters
Teleconverters
16