SMC Networks None manual Dhcp IP Address Setting

`

IP CAM User’ Guide

Pan/Tilt IP Surveillance Camera

Example:

1.Set up the IP CAM with fixed IP address.

2.Turn on your computer and open IE browser. Type 211.78.174.94:( 1025： 1026：1039… .) in the Address line. Now you can access into the monitoring screen of network.

2.4-2 DHCP - IP Address Setting:

•Use RJ-45 Ethernet cable (red) to connect ADSL host and switching hub. Then use RJ-45 Ethernet cable (blue) to connect PC and IP CAM (as shown below).

•Connect the power adaptor to the power port (on the rear) of IP-CAM. Now, the status LED on the top of IP-CAM will light up.

•Set up the connection way inside the PC network: Please go to

Control Panel	--->	Network Connections			---> Choose		Activated		LAN
connection ---	> right click your mouse ---				> Select	Properties(P)		---> Select
Internet Protocol (TCP/IP)			---> Select	Properties(R)

--->ClickObtain an IP address automatically(O), Obtain DNS server address automatically(B).

IP CAM USER’S GUIDE PAGE 12/57 Rev. PV1.0