SMC Networks None manual DNS Server, Mail Server

`

IP CAM User’ Guide

Pan/Tilt IP Surveillance Camera

5.4.4DNS Server

This menu allows you to enter the IP address of the DNS (Domain Name Server ).

By doing this, you can replace the IP address of the IP CAM with an http name (such as myIPCAM.XXX), making it easier to remember. The default DNS1 value is “168.95.1.1” (Hinet). If the connection fails, the system will automatically attempt to connect to DNS2.

5.5SERVER SETUP

This menu allows you to enter various server settings, including:

-Mail Server

-FTP Server

-DDNS Server

-NTP Server

5.5.1Mail Server

This refers to settings pertaining to sending image files via a mail server. You must also

make sure that the Mail Image settings from 5.3 are enabled to e-mail a file to the designated address upon event trigger. This system supports SMTP (Simple Mail Transfer Protocol) servers.

How to use mail server settings:

Step 1: Enter the IP address or http web address of the mail server in “IP/Host”.

Step 2: Enter the e-mail address of the sender in “Mail From”.

Step 3: Enter the e-mail address of the recipient in “Receipt to”.

Step 4: Enter the registered account ID of the mail server in “Account ID”

Step 5: Enter the correct mail server password in “Password”

IP CAM USER’S GUIDE PAGE 39/57 Rev. PV1.0