`
IP CAM User’ Guide
Pan/Tilt IP Surveillance Camera
Step 5. When the installation is complete, you may begin viewing the surveillance image for the first time, as shown below.
Note: This action loads ActiveX components from the DN-16023 System to the local machine. To ensure your machine cannot run malicious ActiveX content from the Internet without authorization, you will be prompted to allow the ActiveX component of your browser to interact with the DN-16023 each time you access it. When you view the stream from the IP CAM and you see the prompts regarding downloading, running or enabling ActiveX content from the IP address of the DN-16023, click “Yes”to allow your computer to display the video from your camera .If you are prompted to allow ActiveX content when you are not connected to your DN-16023, ensure the provider of the content is a reliable and secure source for running programs on your PC. If you are in doubt about the source of the ActiveX program you are being requested to allow to run on your system, click “No”to ensure you don’t allow malicious programs to interfere with your PC.
3.3TAKE A SHOT
This function allows users to capture the screenshot as a photo, and save it on the computer.
Directions:
Step 1. Go to the
menu, and go to the live image.
Step 2: Hold down the Ctrl key on your keyboard;
Step 3. Place the cursor on the surveillance image and left click with your mouse. The captured image should flash momentarily, as shown below:
(or press the 
button)
IP CAM USER’S GUIDE | PAGE 30/57 | Rev. PV1.0 |