SMC Networks None manual IP Assignment：, PPPoE, Http Server

`

IP CAM User’ Guide

Pan/Tilt IP Surveillance Camera

5.4.1IP Assignment：

Static IP Assignment refers to the fixed settings of the ISP or network engineering department.

IP Address: Includes Static, DHCP and PPPoE. DHCP and PPPoE are typically dynamic IPs where a DHCP server or your ISP designates an IP address each time you log on.

When using the “Static”setting, you must enter the following information:

-IP Address：The IP address of the IP CAM

-Subnet Mask：Set by default to 255.255.255.0

-Gateway：Default gateway

When using the “DHCP”setting, you do not need to enter any of the above settings. You must only enter the address of the DHCP Server in the “Server”field.

When using the “PPPoE”setting, you must correctly enter your ISP Login name and password. Please refer to unit 5.4.2 for details.

5.4.2 PPPoE

This menu allows you to enter the dial-up settings during PPPoE IP assignment. This usually refers to entering your ID account name and password. Remember that you must also enter your ISP log-in settings.

How to Setup PPPoE

Step 1. Enter your correct user ID in the “Account”field.

Step 2. Enter your correct password in the “Password”field.

Step 3. Click on Submit to complete your settings.

Note: Because PPPoE utilizes a dynamic IP address from an ISP, the IP settings for the DN-16023 could differ for each use. It is suggested that an IP Router be used to connect to the PPPoE or DDNS. This will assist your computer in finding the

IPCAM.

5.4.3HTTP Server

This menu allows you to enter the port number of the DN-16023 IPCAM internal web server (or HTTP Server) via HTTP protocol. The default port number is “80”.

IP CAM USER’S GUIDE PAGE 38/57 Rev. PV1.0